Specifications
WAN services
Issue 1 January 2008 33
Physical media
To use the G450 as the endpoint device for a WAN, install a WAN media module and connect
the WAN line to a port on the media module. When you connect a WAN line to a media module,
the G450 serves as the router for the WAN line.
You can also use the fixed ETH WAN Fast Ethernet port as a WAN endpoint by configuring the
port’s interface for PPPoE encapsulation (ADSL modem) or Ethernet-DHCP/static IP (cable
modem).
To use the G450 as a router, connect the external endpoint device to the ETH WAN port on the
G450 front panel using a standard network cable.
WAN line support
The G450 supports the following types of data WAN line:
● E1/T1
● Universal Serial Port
● PPPoE (ADSL modem)
● Ethernet-DHCP/static IP (cable modem)
Media modules necessary for each WAN line
The table below lists which media modules to install to connect each type of outside WAN line.
For more information about each type of media module, see Chapter 2:
Optional components.
Table 7: Outside WAN lines supported and matching media modules
WAN line Media modules
Universal Serial Port MM342
E1/T1 data lines MM340
PPPoE (ADSL modem) Chassis
Ethernet (DHCP/static IP)
(cable modem)
Chassis










