User manual

User guide P9-0135-B 34 of 52 Version 1.0.3/2012
Medema Production A/S
Transporting by motor vehicle
The Mini Crosser must always be restrained during transport in
a motor vehicle or trailer.
Avoid lifting by the seat, covers, handlebars and armrests
If you just need to lift the scooter slightly, take hold of it between
the rear lights and by the front bumper.
Secure it in the vehicle with belts attached to the two eyes at
the front and two at the back. All the eyes are marked in yellow.
See the section entitled “Securing to vehicle fl oor with belts”.
Transporting by plane
If the Mini Crosser is to be transported by plane, the airlines
require:
• the batteries to be fl ight-approved
• the air to be let out of the tyres
• the battery leads to be disconnected (not always, but frequently)
The seat and cover have to be removed to disconnect the
battery leads.
A battery declaration for air travel can be found on the Mini
Crosser website:
http://www.minicrosser.dk/Download_brochurer.asp
For transport in an estate car,
the seat can be lifted off and the
handlebars folded down. This
reduces the maximum height to
70 cm.










