User manual

Quick guide P9-0135-Q

13 of 20

Version 1.0.0/2012

Medema Production A/S

General care and maintenance

A Mini Crosser M-MaxX does not require much maintenance. It should

be kept in a generally good condition, however. The following should be

checked regularly:

• Tyre pressure (if pneumatic tyres are ﬁ tted)

• Tyre wear

• Keep the control panel, the charging socket and the electronics box under the

seat dry.

• Battery charging

Never wash the Mini Crosser with a high-pressure cleaner or direct water

jet! This could damage the Mini Crosser’s electronics.

To keep the Mini Crosser in good condition safety-wise, we recommend the

following regular checks:

Daily:

• Test the indicators and driving lights before using the Mini Crosser in the dark

or poor visibility.

Every three months:

• Test the brakes and motor disengagement

With the disengagement lever up, it must not be possible to push the Mini

Crosser.

• Test the brake disengagement function

When the brake disengagement lever is up, the battery indicator should ﬂ ash

to show an error if the Mini Crosser is turned on. In this case the Mini Crosser

must not be able to move when the accelerator is activated.

• Test the electrical release mechanism.

Test that the Mini Crosser can be pushed when the electrical release

button is held. When the button is released, it can no longer be pushed.

• Lubricate the lever arm on the brake hub with acid-free oil - left-hand rear

wheel.