User guide

User guide P9-0270-B 45 of 56 Version 2.0.4/2013
Medema Production A/S
To adjust the calf
pads, undo this screw.
Remember to tighten
again after fi nishing the
adjustment.
Push the release handle
and swing the leg support
to the side.
In this position, you will
be able to lift off the leg
support.
Note!
There are no leads that
need to be removed.
Adjusting the height and
angle using the joystick:
Switch to the seat functions
setting by pressing the up/
down button.
Toggle between the settings
with the Select button.
The icon for the left leg
support starts fl ashing, and
you can adjust it by moving
the joystick up and down.
Use the Select button until
the icon for the right leg
support starts fl ashing.
If both icons are fl ashing,
you can adjust both leg
supports at once.