Operation Manual

Setting the Octave
Setting the Split Point
Fade in Duration
Press the [FUNCTION] button.
Select “OCTAVE”.
Use [FUNCTION], [BACK] or [NEXT] button to select
OCTAVE. The LCD displays the octave value. The value
ranges from -1 to 1 and the default value is relevance to the
voice.
This function determines the relative octave setting for the
keyboard-played voice R1, R2 and L.
Change the octave value.
Use the data dial, [+/YES] or [-/NO] button to change the
octave value.
Press [+/YES] and [-/NO] simultaneously to set the default
octave value.
1.
2.
3.
Press the [FUNCTION] button.
Select “FADE IN”.
Use [FUNCTION], [BACK] or [NEXT] button to select FADE
IN. The LCD displays the time value. The value ranges from
1 to 30 seconds and the default value is 10.
Change the time value.
Use the data dial, [+/YES] or [-/NO] button to change the
fade in time value.
Press [+/YES] and [-/NO] simultaneously to set the default
value.
1.
2.
3.
Press the [FUNCTION] button.
Select “SPLIT POINT”.
Use [FUNCTION], [BACK] or [NEXT] button to select SPLIT
POINT. The LCD displays the default split point is 19
(#F3/G3).
Change the split.
Use the data dial, [+/YES] or [-/NO] button to change the split
point and you can simply press a key on the keyboard to set
it as the split point.
Press [+/YES] and [-/NO] simultaneously to set the default
split point.
The point on the keyboard that separates the auto
accompaniment section and the right-hand section of the
keyboard is called the “split point”.
When the auto accompaniment is on, keys played to the left of
the split point are used for controlling the auto accompaniment.
When the auto accompaniment is off, keys played to the left of
the split point are used for playing voice lower.
1.
2.
3.
FUNCTION
FUNCTION
FUNCTION
30
Octave
SPlit Pt
Fade In
BACK NEXT
BACK NEXT
BACK NEXT
Andere functies
Octaafinstellingen
Fade-in-duur
Het splitpunt bepalen
1. Druk op de FUNCTION-toets.
2. Kies “OCTAVE”.
Gebruik de toetsen FUNCTION, BACK en NEXT om OCTAVE te kiezen. Het
LCD-venster toont de huidige instelling. Deze waarde heeft een bereik van -1
tot 1 en de standaardwaarde is afhankelijk van het gekozen geluid. Deze functie
beïnvloedt de relatieve toonhoogte van via het klavier bespeelde geluiden R1,
R2 en L.
3. Verander van octaaf.
Gebruik het datawiel of de toetsen +/YES en -/NO om het octaaf aan te passen.
Gelijktijdig indrukken van de toetsen +/YES en -/NO resulteert in het terugzetten
van de standaardwaarde van de octaaf.
Het punt op het klavier dat scheiding maakt tussen de begeleidingszone en de
rechterhandzone wordt het “splitpunt” genoemd.
Wanneer de Begeleidingsautomaat is ingeschakeld, worden toetsen links van het
splitpunt gebruikt om de begeleidingsautomaat aan te sturen. Wanneer de
begeleidingsautomaat is uitgeschakeld, worden de toetsen links van het splitpunt
gebruikt om het Lower-geluid te bespelen.
1. Druk op de FUNCTION-toets.
2. Kies “SPLIT POINT”.
Gebruik de toetsen FUNCTION, BACK en NEXT om SPLIT POINT te kiezen. Het
LCD-venster toont de standaard instellingen 19 (F#3/G3).
3. Verander het splitpunt.
Gebruik het datawiel of de toetsen +/YES en -/NO om het octaaf aan te passen
of druk simpelweg op een toets op het klavier om het splitpunt te bepalen.
Gelijktijdig indrukken van de toetsen +/YES en -/NO resulteert in het terugzetten
van de standaardwaarde van het splitpunt.
1. Druk op de FUNCTION-toets.
2. Kies “FADE IN”.
Gebruik de toetsen FUNCTION, BACK en NEXT om FADE IN te kiezen. Het
LCD-venster toont de huidige instelling. Deze waarde heeft een bereik van 1
tot 30 seconde en de standaardinstelling is 10.
3. Verander de tijdinstelling.
Gebruik het datawiel of de toetsen +/YES en -/NO om de tijdinstelling aan te
passen.
Gelijktijdig indrukken van de toetsen +/YES en -/NO resulteert in het
terugzetten van de standaardwaarde van de tijdinstelling.