Operation Manual

Press [RECORD] again while recording can stop this action
immediately.
When the capacity is full, the recording will be stopped
automatically.
When the record ending is finished, the recording will be
stopped automatically.
Press [PLAY/STOP] button to enter the user song selected
mode. LCD displays the sequence number of user’s song
and “UserSong”.
Press [+/YES] or [-/NO] button to select the user song you
want to playback.
On the left side of LCD, cursor indicates whether the track
data has been recorded or not. If there’s data on this track,
the cursor will be lightened.
To mute a track, simply press the button of selected track
and cursor will be darkened. This track will not sound when
the song is played.
Press [PLAY/STOP] button again to play the user song. If
there is no user song you have recorded it will exit the user
song selected mode.
Press [PLAY/STOP] button to enter the user song selection
mode.
Press [+/YES] or [-/NO] button to select the user song you
want to delete.
Press [RECORD] button, LCD displays “Delete?”. Press the
[+/YES] button to delete the user song.
Stopping Recording
Playing back the User Song
Deleting the User Song
1.
2.
3.
1.
2.
3.
Note:
Hold down [RECORD] and [PLAY/STOP] button then power on,
all recorded data will be erased.
25
Song-opname
Opname beëindigen
Gebruikerssong afspelen
Gebruikerssong verwijderen
Druk gedurende de opname nogmaals op de RECORD-toets om de
oname onmiddellijk te beëindigen.
Wanneer de beschikbare opnamecapaciteit zijn einde heeft bereikt, stopt
de opname automatisch.
Wanneer de Ending-sectie wordt gebruikt, stopt de opname automatisch
een het einde van de Ending.
1. Druk op de PLAY/STOP-toets om toegang te krijgen tot de
Gebruikerssongkeuze-modus. Het LCD-venster toont het sequence-
nummer van de gebruikerssong en “UserSong”.
2. Druk op de toetsen +/YES of -/NO om de gebruikerssong die je wilt
afspelen te kiezen.
Aan de linkerkant van het LCD-venster geeft de cursor aan of er data op
het spoor zijn opgenomen of niet. Als er data op het spoor staan is de
cursor verlicht.
Om een spoor te onderdrukken, druk simpelweg op de knop van het
beftreffende spoor en de cursor is niet langer verlicht. Dit spoor wordt
niet weergegeven als de song wordt afgespeeld.
3. Druk nogmaals op de PLAY/STOP-toets om het afspelen van de
gebruikerssong te starten. Als er geen gebruikerssongs zijn die je hebt
opgenomen, wordt de Gebruikerssongkeuze-modus vanzelf verlaten.
1. Druk op de PLAY/STOP-toets om toegang te krijgen tot de
Gebruikerssongkeuze-modus.
2. Druk op de toetsen +/YES of -/NO om de gebruikerssong die je wilt
verwijderen te kiezen.
3. Druk op de RECORD-toets, het LCD-venster toont “Delete?”. Druk op
de +/YES-toets om de betreffende song te verwijderen.
Opmerking:
Houd de toetsen RECORD en PLAY/STOP ingedrukt bij het inschakelen
van het apparaat om alle data te wissen.