Operation Manual

Mixer
1.
2.
3.
Note:
Effect is only valid for the Voice R1.
Press the [IFX] button.
Turn on the IFX and the icon “IFX” will be lighten. The LCD
displays “Chorus”, it means the default effect setting is
Chorus.
Turn off the effect.
Press the [IFX] button again in the IFX mode will turn off the
insert effect
and the icon “IFX” will disappear.
Change the effect type.
Press the [FUNCTION] button and use the [BACK] or [NEXT]
to select Chorus. Use the data dial, [+/YES] or [-/NO] button
to change the IFX type. There are totally 7 types of insert
effects: Chorus, Flanger, Phaser, Tremolo, Distort, Wah and
Dynamic.
1.
2.
Press the [MIXER] button.
Now you have entered the menu of MIXER. Use the [MIXER],
[BACK] or the [NEXT] button to select a part to change its
volume.
Adjust the volume of a musical part.
To adjust the selected volume setting, please use the data
dial, the [+/YES] or the [-/NO] button.
Option
Accomp VOLUME
Rhythm_s VOLUME
Rhythm_m VOLUME
BASS VOLUME
Chord 1 VOLUME
Chord 2 VOLUME
Chord 3 VOLUME
Phrase 1 VOLUME
Phrase 2 VOLUME
VOICE R1 VOLUME
VOICE R2 VOLUME
VOICE L VOLUME
LCD Display
XXX Accomp
XXX Rhythm_s
XXX Rhythm_m
XXX Bass
XXX Chord1
XXX Chord2
XXX Chord3
XXX Phrase1
XXX Phrase2
XXX Voice R1
XXX Voice R2
XXX Lower
Range
0-127
0-127
0-127
0-127
0-127
0-127
0-127
0-127
0-127
0-127
0-127
0-127
Description
110
120
120
110
120
120
120
120
120
120
90
50
The option and the parameters are as the follows:
18
Insert-effect
Keuzemogelijkheid
LCD-venster
Bereik
Beschrijving
1. Druk op de MIXER-knop.
Je zit nu in het keuzemenu van de mixer. Gebruik de knoppen MIXER,
BACK en NEXT om partij de kiezen waarvan je het volume wilt wijzigen.
2. Pas het volume van de partij aan.
Om het instellingen van de gekozen partij te wijzigen, gebruik het datawiel
en de knoppen +/YES en -/NO.
De keuzemogelijkheden en de bijbehorende parameters zijn:
1. Druk op de IFX-knop.
Schakel het Insert-effect, het IFX-pictogram licht op. Het LCD-venster toonr
“Chorus”, wat betekent dat de standaard instelling Chorus is.
2. Zet het effect uit.
Druk nogmaals op de IFX-knop om het Insert-effect uit te schakelen. Het IFX-
pictogram verdwijnt.
3. Verander het effecttype.
Druk op de FUNCTION-toets en gebruik BACK en NEXT om Chorus te
kiezen. Gebruik het datawielof de knoppen +/YES en -/NO om het effecttype
te kiezen. Er zijn 7 types Insert-effecten: Chorus, Flanger, Phaser, Tremolo,
Distort, Wah en Dynamic.
Opmerking:
Het effect wordt uitsluitend toegepast op Voice R1.