Operation Manual

DSP
With the built in digital effects, you can add ambiance and depth to your music in a variety of ways – such as
adding reverb that makes you sound like you are playing in a concert hall or adding harmony notes for a full, rich
sound.
The effect will be applied. Press the DSP button, you can turn
on or turn off the DSP effect.
Reverb
Chorus
The reverb effect makes your performance sound like you are
playing in a concert hall, or live in a club.
1.
2.
3.
4.
Press the [FUNCTION] button.
Select “REVERB LEVEL”.
Use the [FUNCTION], [BACK] or [NEXT] button to select
REVERB LEVEL. The LCD displays the reverb level. The
level ranges from 0 to 127.
Change the reverb level.
Use the data dial, [+/YES] or [-/NO] button to change the
reverb level. Press [+/YES] and [-/NO] simultaneously to set
the default reverb level
Play the keyboard to hear the change.
The chorus effect makes your playing sounds as though
multiple parts were being played together at the same time.
1.
2.
3.
4.
Press the [FUNCTION] button.
Select “CHORUS LEVEL”.
Use the [FUNCTION], [BACK] or [NEXT] button to select
CHORUS LEVEL. The LCD displays the chorus level. The
level ranges from 0 to 127.
Change the chorus level.
Use the data dial, [+/YES] or [-/NO] button to change the
chorus level.
Press [+/YES] and [-/NO] simultaneously to set the default
chorus level.
Play the keyboard to hear the change.
16
Digitale effecten
Galm
Met de ingebouwde effecten kun je op verschillende manieren ruimte en diepte aan je muziek toevoegen – zoals
galm, die je laat klinken alsof je in een concertzaal speelt of een verdubbeling voor een vol, rijk geluid.
Het effect wordt toegevoegd. Door op de DSP-knop te drukken, kun je het DSP-
effect aan of uit zetten.
Het galmeffect laat je uitvoering klinken alsof je live in een concertzaal of club
speelt.
1. Druk op de FUNCTION-knop.
2. Kies “REVERB LEVEL”.
Gebruik de knoppen FUNCTION, BACK of NEXT om REVERB LEVEL te
kiezen. Het LCD-venster toont het huidige galmniveau. Dit heeft een bereik van
0 tot 127.
3. Pas het galmniveau aan.
Gebruik het datawiel of de toetsen +/YES en -/NO om het galmniveau aan te
passen. Druk gelijktijdig op de toetsen +/YES en -/NO om het niveau op de
standaardwaarde terug te zetten.
4. Bespeel het klavier om de verandering te horen.
Het chorus-effect produceert het geluid alsof meerdere partijen tegelijkertijd
worden gespeeld.
1. Druk op de FUNCTION-knop.
2. Kies “CHORUS LEVEL”.
Gebruik de knoppen FUNCTION, BACK of NEXT om CHORUS LEVEL te
kiezen. Het LCD-venster toont het huidige chorusniveau. Dit heeft een bereik
van 0 tot 127.
3. Pas het chorusniveau aan.
Gebruik het datawiel of de toetsen +/YES en -/NO om het chorusniveau aan te
passen. Druk gelijktijdig op de toetsen +/YES en -/NO om het niveau op de
standaardwaarde terug te zetten.
4. Bespeel het klavier om de verandering te horen.