User Manual

5
Connecting Pads and Pedals
Setup
Caution!
To prevent electric shock and damage to the device, make sure the power is switched OFF on
the drum and all related device before making any connection.
Standard: KICK, SNARE, TOM1-3, CRASH, RIDE, HIHAT, HIHAT CONTROL PEDAL.
Using the provided cables, connect with kick, snare, tom1~tom3, ride, crash, hi-hat, hi-hat controller.
Snare is stereo input, support double triggering (increase edge triggering); crash, ride support choke
with stereo input; tom, kick, hi-hat are mono input, which can't response edge triggering. Hi-hat control
pedal is mono input.
Note:
1. The voice of hi-hat pad hitting is controlled by hi-hat pedal. Similar to a real drum kit, the hi-hat pad functions
as an 'open hi-hat' when the pedal is released. When the pedal is stepped, it functions as a 'closed hi-hat'.
2. The valid striking area of cymbal pad (ride, crash or hi-hat) is near the edge of the pad, which is different from
other pads.
Drum Module
Drum Pad
Cymbal Pad
PedalHi-Hat
To
control
Hi-Hat
To Kick
Tom 2To
Tom 3To
SnareTo
Tom 1To
Kick Pad
Hi-HatTo
To Crash
RideTo