Owner`s manual
START /
STOP
SHIFT
SHIFT
SHIFT
Record
With the easy-to-use song recording features, you can record your
own keyboard performances as a user song. 5 user songs can be
recorded with 6 tracks (1 ACCOMP track, 5 MELODY tracks) each.
Start Recording
Before you start recording, you need to select a user song to keep the
recording song.
1. Holding down [SHIFT] button and then press the [RECORD] button
to enter user song selection mode. The LCD displays "RecSong1”
and sequence number. 5 user songs can be recorded.
Use the data dial, [+/YES] or [-/NO] button select the user song
you want to record.
2. Holding down [SHIFT] button and then press the [RECORD] button
again to enter record preparation mode. LCD lightens the “REC”
flag, and LCD will flash beat indicate. The instrument will
automatically select an empty track to record your performance.
The LCD indicates in the left which flashes shows the record track.
3. In the recording preparation status, you can adjust parameters
such as the voice, style and tempo. When recording a new song, it
will automatically select “Melody 1” as the recorded track.
Holding down [SHIFT] button and then press “ACCOMP” (or
“MELODY1” to “MELODY 5”) to make your own selection.
The ACCOMP track and one of MELODY track can be recorded at
the same time, but it cannot record two MOLODY track
simultaneously.
4. Press [START/STOP] button or play the keyboard to start
recording. When choosing the ACCOMP tack and A.B.C. is open,
play an effective chord in left hand section or press [START/STOP]
button would start recording.
Select a Track
The recording track LCD indicates has three states: Blinking, Light,
and Go out.
Blinking: It means the track was chosen for recording. If the track
has recorded data, the original data will be replaced.
Light: It means this track have data, the recording process will record
data with playback the recorded track at the same time.
Go out: There are two cases, one is that this track has data and
cannot playback when recording, the other one is that this track has
no data and you can select “ACCOMP” track (or “MELODY 1” or
“MELODY 2”), repeatedly press buttons which corresponding to each
track, shift track state between blinking, light and go out.
Note:
1. Record style with accompaniment track, and record melody with
melody track.
2. In the recording preparation status, you can repeatedly press the
[ACCOMP], [MELODY 1] ~ [MELODY 5] button to shift track state.
When recording an existing song, the keyboard will automatically
select the empty track next to the occupied track. For example, if
“Melody 1” is occupied, then “Melody 2” will be selected as the
record track. When all 6 tracks have been recorded, select the
“melody 1” track to save recordings.
Stop Recording
1. When recording is in process, holding down [SHIFT] button and
then press the [RECORD] button to stop recording.
30
FADE
RecSong1
FADE
GrandPno
FADE
Rec_Full
MELODY 1 MELODY 2 MELODY 3 MELODY 4 MELODY 5 PERFORM.
M2
M3
M4
M5 M6
O.T.S.
M1
O.T.S.
TOUCH
ACCOMP
MELODY 1
MELODY 2
MELODY 3
MELODY 4
SHIFT
0
5
25
75
95
100
aw_A300_Manual_G05_131121
20131121 16:34:28