Owner`s manual
PIANO
DSP
SHIFT
Octave
Octave function determines the relative octave setting for the
keyboard-played voice R1, R2 and L.
1. Press and hold the [SHIFT] button and then press the [OCTAVE]
button to select octave function menu. The LCD displays “xxx
Octave”.
2. When LCD displays the current octave, use [+/YES]/ [-/NO] button
or data dial to change octave value, adjustable range is: -1~ +1.
3. Press the [+/YES] and [-/NO] buttons simultaneously to restore
default setting: 000.
Note:
1. Some voices have a pitch limit which highest and lowest notes do
not sound.
2. You can individually set the octave value of master voice, dual
voice and lower voice. For example, in dual mode, allow the pitch
of the keyboard to be shifted down or up in octave steps.
Piano mode
This function is to set the voice of the whole keyboard to piano
instantly.
1. Press [PIANO] button can enter or exit piano mode.
2. In piano mode, the accompaniment control is the same to other
mode. The accompaniment only plays the rhythm part.
Note:
In piano mode, the A.B.C. is automatically turned off.
Metronome
The metronome provides a click sound, giving you an accurate tempo
guide when you practice, or letting you hear and check how a specific
tempo sounds.
1. Press [METRONOME] button to start the metronome.
2. To stop the metronome, press the [METRONOME] button again.
(The metronome type can be set in the function menu.)
Note:
1. The metronome and style can be started at the same time. If you
start the metronome after the style stop playing, the beat type will
be changed as metronome setting; if you start the metronome while
the style is playing, the beat type will be changed as style setting.
2. You can record your performance while playing back the
metronome. However, the metronome sound is not recorded.
FADE
Octave
FADE
Piano
FADE
GrandPno
13
OCTAVE
METRONOME
OCTAVE
METRONOME
Playing Voices
0
5
25
75
95
100
aw_A300_Manual_G05_131121
20131121 16:34:24