Operation Manual

In kit mode, kit volume (0-32).
1. Press the [MODE] button to select the kit mode, the kit LED
indicator will be lighted.
2. Press the [PAGE] button to select the kit volume page, the
3-digit-LED will display the kit volume(L30).
3.Press [+] or [-] to adjust the value (Automatic save).
Range:(0 to 32).
Select a kit
In kit mode, kit number(001-010,default 1).
1. Press [MODE] button to select the kit mode, the kit LED
indicator will be lighted up, the 3-digit-LED will display the
kit number(001).
2. Press [ + ] or [ - ] to adjust the value.
Range:(001-010).
1. Press [MODE] button to select the kit mode, the kit LED
indicator will be lighted up.
2. Press the [PAGE] button to select the kit reverb page,
reverb effect can be turn on or off by pressing button [+] or [-].
In kit mode, there are 3 pages:
1. kit number(001-010,default 1).
2. kit volume (0-32).
3. kit reverb:(on/off, default on).
CLICK
MODE
PAGE
TEMPO
Figure Kit volume
PAGE 2
PATTERN
KIT
VOICE CLICK
Kit LED indicator
+
-
PAGE 3
PATTERN
KIT
VOICE CLICK
-
PATTERN
KIT
VOICE CLICK
-
Kit LED indicator
Kit LED indicator
Figure number Kit
PATTERN
KIT
VOICE CLICK
Kit LED indicator
+
-
PAGE 1
Select a kit
Adjust the kit volume
Switch reverb on/off
9
0
5
25
75
95
100
AW_DD402_manual_G11_110216
2011󾜀󾜀2󾜀󾜀16󾜀󾜀 14:44:53
Drumkit
Kies een drumkit
Pas het volume van de drumkit aan
Galm aan/-uit-schakelen
Kies in de Kit-modus een kitnummer (001-010, standaardinstelling 001)
1. Druk op de MODE-toets om de Kit-modus te selecteren. De LED-indicator
licht op en het venster toont het kitnummer (001).
2. Druk op de toetsen + of – om de waarde aan te passen. Bereik: 001-010.
In de Kit-modus zijn er 3 paginaʼs:
1. Kitnummer (1-10, standaardinstelling 1)
2. Kitvolume (0-32)
3. Kit-galm (aan/uit, standaardinstelling = aan)
Stel in de Kit-modus het kitvolume in (0-032)
1. Druk op de MODE-toets om de Kit-modus te selecteren. De LED-
indicator licht op.
2. Druk op de PAGE-toets om de pagina voor het kitvolume te kiezen.
Het LED-venster toont het begeleidingsvolume (L30).
3. Druk op de toetsen + of – om de waarde aan te passen (wordt
automatisch opgeslagen). Bereik: 0-32.
1. Druk op de MODE-toets om de Kit-modus te selecteren. De LED-indicator
licht op.
2. Druk op de PAGE-toets om de galmpagina te kiezen. De galm kan worden
in- of uitgeschakeld door de toetsen + of – in te drukken.