User Manual

MedeaWiz® Sprite®
.
2 | P a g e
Introduction
The MedeaWiz® Sprite® is a High Definition digital video repeater capable of HD 1080p HDMI
output. It has a direct trigger input and a 2-way communications serial port. The Sprite® will
play a video or audio file in a circular loop, repeating when power is applied. It will play a
different video or audio file on a trigger input or serial command, and then return to the
looping file.
The Sprite® has no black space when looping or changing files. It will hold the last frame of
video until the first frame displays.
It is simple to set-up with an on-screen menu. No programming required. It has multiple
operating mode options to fit many needs.
In the trigger input mode, you can use a pushbutton, other dry contact, or voltage level change,
with your choice of a High or a Low transition trigger. You can also choose to allow an interrupt
from a new trigger event, or to not allow an interrupt.
In the Serial Control Mode you can have a looping video and control up to 200 other videos to
play on command. Once the commanded video ends, the looping video will play again until a
new command is received.
The Hydra® accessory is available to use with the Sprite® It adds several modes of operation
with multiple trigger inputs, DMX 512 control, and 8 sinking outputs to control lamps, relays
and more.
The Sprite® is one of the most energy efficient “green” video repeaters available today. Using
only 5 Volt DC power at an average of 400 mA, it takes only about 2 Watts to run.
FCC, CE and RoHS certified.