User Manual

MedeaWiz® Sprite®
.
16 | P a g e
Firmware Upgrade
How to upgrade the Sprite® firmware
We may release upgraded firmware in the future. Please check http://www.medeawiz.com/ for
updates.
1) Copy the new .img firmware file to a USB drive or SD card. Use an empty USB drive or SD
card, or one with your video files on it. Do not use one that contains items not intended for the
Sprite®.
2) Unplug the power to the Sprite®. Insert the USB drive or SD card into the Sprite®. Plug in the
power. Wait 10 seconds or more for the start-up to complete.
3) Using the IR remote control, press the blue File key.
4) Select the drive holding the files by using the orange Arrow keys and green Enter key.
Navigate to the .img firmware file.
5) Select the .img firmware file and press the green Enter key.
6) Select “Yes” and the press the green Enter key.
The power LED will go off. After a while the power LED will come on and the Sprite® will begin
playing a video file, if present.
This process will take a few minutes. Be patient.
We recommend that you leave your video files on the USB drive or SD card. In this case the
Sprite® will begin playing a file, confirming the update is completed.
Do not remove power or remove the USB drive or SD card until the update is competed.
Interrupting the process may result in a non-functional player. It is highly recommended to use
a UPS battery-backup power supply.
You may use either a SD memory card or a USB drive to update the firmware.
If you desire to use an older version of firmware, you may load the older version.