Manualshelf

User Manual

ManualsBrandsMedeaWiz ManualsElectronicsMedeaWiz DV-S1 Sprite Looping HD Media Player – Seamless Audio Video Auto Repeater 1080p 60Hz HDMI, NTSC, PAL Output Trigger and Serial Control
11121314151617181920
MedeaWiz® Sprite®
.
10 | P a g e
Control Mode
Select the external Control Mode for your application
Serial Control is to use a Hydra® input expander or external show control device or micro
controller like a PIC, Atmel, Arduino, Raspberry Pi, or etc. using serial communications.
To use a pushbutton or other single trigger input to play file 001, select an option below:
Trigger Low No Interrupt When triggered, file 001 will play to the end with no interruption.
Trigger Low with Interrupt When triggered, file 001 will play and will re-start if re-triggered.
Trigger Low Delayed File 001 will begin play at the end of file 000, with no interruption.
Trigger High No Interrupt When triggered, file 001 will play to the end with no interruption.
Trigger High with Interrupt When triggered, file 001 will play and will re-start if re-triggered.
Trigger High Delayed File 001 will begin play at the end of file 000, with no interruption.
Trigger Low is applying Ground to the input. Trigger High is the inverse, removing Ground.
You must have at least 2 files. The loop file named 000 and a trigger file named 001
The loop file 000 will play continuously until a trigger is received, then the trigger file will play.
After the trigger file 001 finishes, the loop file will play again until a new trigger occurs.