User manual

CONNECTIONS CONTINUED
Page6
Component Video Connection to Amp or TV
Component Video offers the next best picture quality to HDMI so if your system does not have a HDMI
input we suggest you use the Component Video Connection.
Pr
Pb
Y
Plug the AC/DC adapter into the mains outlet and plug the DC Jack into the DC IN at the rear of the
MED800X3D.
DO NOT USE ANY AC/DC ADAPTER AND ONLY USE THE ONE SUPPLIED otherwise you may cause
damage to the unit. The LED will light up ‘RED’. Press the On/Off button on the MED800X3D front panel and
LED will turn to Blue. You can switch the MED800X3D ‘Off’ by pressing the ‘On/Off’ button on the remote or by
pressing the ‘On/Off’ button on the unit. When in standby the LED will turn Red.
POWER UP AND STANDBY