User Manual

5 6
OPERATION INSTRUCTIONS
Remove the massager from the packaging and place it on a flat, level surface in
front of your chair.
Connect the adapter cable to the corresponding socket on the massager. Then
plug the adapter into an outlet.
The massager enters the standby state, the red indicator light of the ON/OFF
button flashes.
Press the ON/OFF button to activate the massager.
SETUP
OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS
NOTE: When the massager is activated with the ON/OFF button, it starts to work under
default mode:
VIBRATION HEAT
AIR
INTENSITY
ROLLING TIMER
EXAMPLES EXPLANATION
HOW THE TIMER CONTINUES TO
WORK AFTER SWITCHING
WHEN THE
MASSAGER
WORKED FOR
SWITCH/CHANGE
THE TIME
High
Temperature
Off
Low
Intensity
Low
Speed
15 mins