Owner Manual

ManualsBrandsMECO Corporation ManualsGas Grill Grill Add-onsAmericana 22″ Rotisserie, Electric

MODEL 1290-120 VOLT ELECTRIC

MODEL 1291-1.5 VOLT PORTABLE BATTERY POWERED

(FOR USE WITH MECO SERIES 4000 & 9000 GRILLS)

• Failure to follow these instructions could result in death, serious personal injury, or property

damage.

• Read and follow instructions carefully before assembly or use.

• Do not

use this product for any other purpose than which it is intended.

• These instructions must be kept with the user. SAVE THESE INSTRUCTIONS.

For Customer Service, call 1-800-251-7558 or visit our web site at www.meco.net

FOR OUTDOOR HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE.

Assembly and Use Instructions

ROTISSERIE

Summary of content (4 pages)

PAGE 1
ROTISSERIE Assembly and Use Instructions MODEL 1290-120 VOLT ELECTRIC MODEL 1291-1.5 VOLT PORTABLE BATTERY POWERED (FOR USE WITH MECO SERIES 4000 & 9000 GRILLS) FOR OUTDOOR HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE. For Customer Service, call 1-800-251-7558 or visit our web site at www.meco.net • Failure to follow these instructions could result in death, serious personal injury, or property damage. • Read and follow instructions carefully before assembly or use.
PAGE 2
IMPORTANT SAFEGUARDS To reduce the risk of serious bodily injury or death: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles, knobs, or wear proper gloves. 3. To protect against electrical shock, do not immerse cord, plug, or rotisserie motor in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before cleaning, or putting on or taking off parts. 6.
PAGE 3
FIG. 1B FIG. 1D FIG. 1C ASSEMBLY: 4. Start the fire in your grill, then place the drip pan so it will catch all the drippings from the meat. Arrange the charcoal all around the edges of the pan. (FIG. 1D). 1. Insert the two Shoulder Bolts (1) into the Hood Stop (2), through the left side of the Bowl and through the Motor Bracket (3). Attach a Nut (4) to each bolt and tighten. 5.
PAGE 4
FOR 9000 SERIES ELECTRIC GRILLS FIG. 2A FIG. 2B FIG. 2D Make sure prongs of spit fork are securely engaged in meat. Slide the spit fork back onto spit shaft and into meat, and tighten thumb screw. FIG. 2C 2. Check for balance by turning shaft in your hand. Adjust and tighten thumb screws with pliers or wrench if needed. You may have to tie loose sections of meat, such as wings and legs of a fowl, with string to keep them off element. ASSEMBLY: 1. Remove COOKING GRIDand store away.