SDS

Mechanic In A Bottle Gasoline Test Swabs
Diesel Mechanic In A Bottle Test Swabs
Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System
No special handing required. Handle swabs in a manner that minimizes the risk of damage. In handling damaged
swabs, avoid contact with eyes, skin or clothing. Wash hands after handling filters.
Storage: Store in a dry area. Keep container sealed when not in use.
Chemical Name
Exposure Limits
N/A
N/A
Ventilation: No special ventilation required for handling undamaged filters.
Respiratory Protection: None required for normal use. For operations where exposures are excessive or irritation is
experienced, a NIOSH approved respirator should be used. Respirator selection and use should be based on
contaminant type, form and concentration. Follow OSHA 1910.134, ANSI Z88.2 and good Industrial Hygiene
practice.
Skin Protection: None required for normal handling.
Eye Protection: None required for normal handling.
Appearance and Odor: 6” Brown Stick with a white cotton tip
Specific Gravity: Not applicable
Boiling Point: Not applicable
Water Solubility: Insoluble
Melting Point: Not determined
Vapor Pressure: Not applicable
Flash Point: Not applicable
Vapor Density: Not applicable
Auto-Ignition Point: Not determined
pH: Not applicable.
Section 7 – Handling and Storage
Section 8 – Exposure Controls/Personal Protection
Section 9 – Physical and Chemical Properties