SDS

ManualsBrandsMechanic In A Bottle ManualsAutomotiveMechinic In A Bottle™ Gas Test Swab - 3 Pack

Mechanic In A Bottle Gasoline Test Swabs

Diesel Mechanic In A Bottle Test Swabs

Safety Data Sheet

Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System

Product Name: Mechanic In A Bottle Gasoline Test Swabs

Diesel Mechanic In A Bottle Test Swabs

B3C Fuel Solutions LLC, 108 Daytona Street, Conway, SC 29526, 843-347-0482

Recommended Use: Testing Fuel

MSDS Date of Preparation: 05/28/2015

RESTRICTIONS on USE

THESE FUEL TESTING SWABS

DEVICE IS FOR

GASOLINE & DIESEL FUEL ONLY

Emergency Response Number: INFOTRAC 800-535-5053

International Emergency Telephone Number: +1-353-323-3500

Physical Appearance: 6” Brown Stick with a white cotton tip

Hazard Statements

Hazards Identification: The products described above have not been tested as a whole to determine

whether they are a health hazard. By HCS 29 CFR 1910.1200(d) it must be assumed to present the

same health hazard as that associated with the components which comprise 1% or greater of the

product.

An evaluation of the components of the product Mechanic In A Bottle Gasoline Swabs by B3C Fuel

Solutions LLC has been made and, under OSHA Hazard Communication Standard (HCS) 29 CFR

1910.1200(d), this product had been determined to be non-hazardous.

An evaluation of the components of the product Diesel Mechanic In A Bottle Test Swabs by B3C Fuel

Solutions LLC has been made and, under OSHA Hazard Communication Standard (HCS) 29 CFR

1910.1200(d), this product had been determined to be non-hazardous.

Section 1 - Chemical Product and Company Identification

Section 2 -

Hazards Identification

Summary of content (6 pages)

PAGE 1
Mechanic In A Bottle Gasoline Test Swabs Diesel Mechanic In A Bottle Test Swabs Safety Data Sheet Conforms to OSHA CFR 29 1910.
PAGE 2
Mechanic In A Bottle Gasoline Test Swabs Diesel Mechanic In A Bottle Test Swabs Conforms to OSHA CFR 29 1910.
PAGE 3
Mechanic In A Bottle Gasoline Test Swabs Diesel Mechanic In A Bottle Test Swabs Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Section 4 - FIRST AID MEASURES Contact with the product should not require first aid. Wash hands after handling. If direct contact with the swab occurs, the following first aid should be administered. Eye Contact: Flush eyes thoroughly with running water for several minutes. Get medical attention if irritation occurs and persists.
PAGE 4
Mechanic In A Bottle Gasoline Test Swabs Diesel Mechanic In A Bottle Test Swabs Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Section 7 – Handling and Storage No special handing required. Handle swabs in a manner that minimizes the risk of damage. In handling damaged swabs, avoid contact with eyes, skin or clothing. Wash hands after handling filters. Storage: Store in a dry area. Keep container sealed when not in use.
PAGE 5
Mechanic In A Bottle Gasoline Test Swabs Diesel Mechanic In A Bottle Test Swabs Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Stability: This product is stable. Section 10 – Stability and Reactivity Incompatibility/Conditions to Avoid: Product will absorb a small amount of fuel and possibly change color.
PAGE 6
Mechanic In A Bottle Gasoline Test Swabs Diesel Mechanic In A Bottle Test Swabs Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System Section 15 – Regulatory Information CERCLA 103 Reportable Quantity: This product is not subject to CERCLA reporting requirements. Many states have more stringent reporting requirements. Report releases as required by all federal, state and local authorities.