User's Guide

90
MECHA C2 User’s Guide v.02.8.6
© 2021 FANOTEC
Show your own presets in C2’s Preset Menu
In this section, we are going to show you how to make a preset you created in the
User Interface appear in the Preset (P) Menu.
By default, on the first page of C2’s Preset Menu are shown some default presets,
while pages 2-8 are blank and can be used in two ways:
● either to create presets directly in the Preset Menu, as shown in Creating a
Preset in C2’s Menu Mode
● or to display some presets you have already created in the User Interface, as
we will se in this section.
For example, the first option on page 2 might look like this:
The next options on this page might be: 021 EMPTY, 022 EMPTY, ..., 029 EMPTY
(10 in total).
To be able to see a preset in exactly the above position – 020 – you have to
rename that preset adding the code 020 to the beginning of the preset name. So
access the User Interface using your smartphone or computer, select the preset
from the Presets list and click the [Rename] button.
In our example, the preset is kit-lens-pano:
📹 https://youtu.be/t3AkkXDxmI0
MECHA User Interface Basics – Presets
Long press the
=
button to enter Menu Mode. Press the
P
button
to exit Menu Mode.