User's Guide
Table Of Contents
- Cover
- WARNINGS
- Simple Mode
- Advanced Mode
- User Interface (UI)
- Configuration Page
- Other Updating Methods
- Working with Presets
- Programming a Preset Using Parameters
- How to Create Your Own Presets Using the UI
- Show your own presets in C2’s Preset Menu
- MECHA’s Simple Scripting (MSS)
- Three Row Panorama + Nadir + Zenith (MSS)
- Shooting Panorama Made Easy for Dual Axis
- MSS Script Explained
- What Needs to be Changed, sometimes, in Real Situations
- Using Pause in MSS Script
- Let's Take a more Dense Approach with more Photos toward Gigapixel Imagery
- Rewind after each ROW
- Shooting in Horizontal Zigzag Pattern
- Script for 2 Focal Lengths - MECHA Dual Axis
- Download more Presets from Server
- Launch a Preset by Scanning a QR Code
- How to Set Both MECHA and Smartphone to Have Internet Access
- Panorama Using MECHA’s Buttons
- MECHA’s Current Codes
- Appendix
88
MECHA C2 User’s Guide v.02.8.6
© 2021 FANOTEC
● 16+128 uStep — Micro-stepping value, simple or combined; for example,
different values for acceleration + constant speed region.
● Medium Load — Means a profile for an average load. The other options are
Light, Heavy, and Ring.
Modifying a Preset
To get a preset with 6 Shots and just 1 horizontal row:
1. Instead of 12 Shots select 6 Shots:
2. Remove the second row (-45x12,) and third row (45x12,) from the MSS script
as follows:
SP,0x12,Z,N
3. Follow the instructions below to save the preset.
Saving a Preset
To save a preset, do one of the following:
Most input lists, in both Ring and Row pages, can receive custom
values. There is no error check, nor range check for the custom
values at the moment, so please use this feature with caution.
!