User Guide

How to set both MECHA and

smartphone to have Internet

access

In this chapter, we will explain how to do that and, also, how to enable

updates, and how to use your device for usual Internet browsing, at the

same !me.

First, set up a hot-spot on your device and name it

MECHA-PHONE

. Please

refer to your device documenta!on about how to set up a hot-spot.

Suppose the hot-spot is disabled for the moment.

That hot-spot gives 1=2.168.53.xxx address to its clients.

1. Start paired MECHAs, MECHA-H %rst.

2. Connect to MECHA-H /con%g with your device, then set it in STA mode,

choosing the STA op!on from the Default Mode select list.

Scroll to STA Mode and enter the following values:

? Sta!c IP: 1=2.168.53.101

? Subnet: 2;;.2;;.2;;.0

? Gateway: 1=2.168.53.1

? DNS: 8.8.8.8

3. Scroll to the bo"om of the page and tap on

[Apply]

bu"on.

5. Switch to con%g of MECHA-V *at the bo"om of the page+.

MECHA User’s Guide

v.05.4

Dual Axis