User Guide

MECHA User’s Guide v.05.4 ! Dual Axis

EXAMPLE 4

Spiral movement, camera in parked posi!on, say, 5 Shots.

S=90,1=0*65_,=0*0.18R-65_4R2880,=0*9R90_,=

0@ means no photo taken.

0.18R and 4R values for speed for RPM.

=4R will change the speed for MECHA-V to 5 RPM from then on, while

_3R will change the speed for MECHA-H to 3 RPM from then on.

It is a spiral in which MECHA-V is moving con!nuously at 0.18 RPM, and

at/in the same !me MECHA-H is moving con!nuously at 5 RPM. The

rota!on is 2880° for MECHA-H, and due to speed di>erence it is only 130°

for MECHA-V.

EXAMPLE 5

Panorama consis!ng of 2< frames shot in 3 rows with = shots in each row.

S=90,1=21_0,=_14,8=0_0,=_-14,8=-21_0,=_14,

8=90_-112,=

=90 tells the start and end posi!on,

which can be omi"ed or set to zero, if no zenith is needed:

S=0,1=21_0,=_14,8=0_0,=_-14,8=-21_0,=_14,

8=0_-112,=

The equal sign, =, at the end means the end of the script, but if you want no

zenith photo, then you can move the end a posi!on forward.

= is like a script terminator, no photo, only end, and the number of shots

will be ignored.

S=0,1=21_0,=_14,8=0_0,=_-14,8=-21_0,=_14,

8=0_-112

Now, the end is =0_-112 *instead of the previous single equal sign =+ which

indicates to terminate not anyway, but exactly at zero level, and -112° rota-