User Guide

MECHA User’s Guide v.05.4 ! Single Axis

Con$gura!on page

The Con%gura!on page can be accessed at 1=2.168.8.1/con%g, using the

following username and password:

Default mode

. The possible values for default mode are: AP, STA, AP9STA.

The default mode set here will be the current mode for MECHA a'er

powering up. However, the default mode can be changed by pressing one

of the MECHA(s bu"ons at spli#ng lights, as follows:

Press MECHA’s bu"on

[3]

- at spli#ng lights - to return the individual

se#ngs to the default values. Very useful if you have forgo"en the set

passwords and cannot access, for example, the con%gura!on page, or the

user interface. The default passwords are men!oned in this user guide.

The maximum value for

Wi-Fi Power

is 100. In our example *see the image

below+, it is 2;.

AP Mode SSID

is the name of MECHA’s ne"work. This is how it appears in

the list of available networks on your device.

SSID default password is

12345678

Pairing PIN

is a four-digit number that allows you to pair automa!cally at

start more than 2 MECHAs connected to the same network or to the same

hot-spot. See

Pairing PIN for more than 2 MECHAs

UI Password

allows you to prevent someone from changing the se#ngs on

the

Con#gura$on

page. You may want to allow someone to access your

interface, but may not want the se#ngs to be changed.

User:

admin

Password:

Mecha