User Guide

• Speed - speed denoted by Revolu!ons Per Minute. Select an op!on from

the list, or enter a value via Custom. If the value is too high, the device

may stop, or move too fast, in which case be prepared to stop it by

clicking/tapping the [Stop] bu"on.

• uStep - micro-stepping value, simple or combined[ for example, di>erent

values for accelera!on 9 constant speed region.

• Load - the op!ons for Load are: Custom, Light, Medium, Heavy, and

Ring. These are op!mized mo!on pro%les for a rated load. We

encourage you to try them all, to see which one is best for the camera

and lens used, or for what you want to do. You may prefer the Heavy

op!on, even if you use a light camera.

• [N x LEFT] bu"on - shoots _ rotates counterclockwise for N posi!ons

with the degrees interval speci%ed above, regardless of the number of

shots speci%ed in the Shots %eld.

For example, if you want to take 3 shots 5;° apart to the le', set the

degrees of rota!on to 5;, and the number of posi!ons to 3, as in the

image below, and click the [3 x LEFT] bu"on.

• [Shoot] bu"on - shoots the number of photos in a set for a single

posi!on. In our example, 1 photo *1 IMG+ is taken. Use this feature when

you want to take some photos in a certain posi!on, without any

rota!on.

• [N x RIGHT] bu"on - the same as [N x LEFT], but shoo!ng and rota!on

are done clockwise.

• [Cancel] bu"on - executes a smooth stop.

• [PAUSE] bu!on - pauses the current running preset. Click/tap again to

con!nue. The code 21< switches MECHA to or o> pause mode, the same

as clicking the [Pause] bu"on on UI, or on IR Remote.

If MECHA is in pause mode, the LEDs blink like

: *a colon+. In idle status,

there is a slow blink, and when running presets and paused, there is the

regular blink.

MECHA User’s Guide v.05.4 ! Single Axis