User Guide

100
MECHA User’s Guide v.05.4
© 2020 FANOTEC
How to unpair MECHAs
Temporary Unpairing
Power up MECHA-V and
press MECHA-V bu"on [1]
when LEDs show
spli#ng lights *
- = - = - = - =
+. It does not ma"er whether MECHA-H is on or
o> at this moment. The units remain unpaired un!l you power up the sys-
tem again.
Permanent Unpairing
While the units are temporarily unpaired, access the MECHA-H con%gura-
!on page, and select the op!on
AP
from the
Default Mode
list, then tap/
click
[Apply]
bu"on at the bo"om of the con%gura!on page.
Re-Pairing a'er Unpairing
Power up MECHA-V and
press MECHA-V bu"on [2]
when LEDs show
spli#ng lights *
- = - = - = - =
+. It does not ma"er whether MECHA-H is on or
o> at this moment. When both units are powered up, they will pair auto-
ma!cally.
If a pairing PIN is set
If a pairing PIN is set, and
you want to permanently break the pairing, please
set a di>erent PIN in MECHA-V.