Data Sheet

ManualsBrandsMEC ManualsPush Actuated Switches & ButtonsPushbutton 25 Vdc 0.05 A 1 x Off/(On) IP67 momentary 1 pc(s)

PANEL SWITCHES

• Recommended load :

- Gold contacts : 0.5µ-50 mA 24 VDC

- Silver contacts : 0.5-50 mA 24 VDC

• Contact resistance : <30 mΩ - typically 10 mΩ

• Insulation resistance : >10 MΩ

• Contact bounce : <2 mS - typically 0.5 mS

ELECTRICAL SPECIFICATIONS

• Sealing : IP67 according to IEC 60529

• Working and storage temperature :

- non-illuminated : -40 °C/+160 °C (-40 °F to +320 °F)

- illuminated : -20 °C /+80 °C (-4 °F to +176 °F)

• Soldering :

- through-hole : IEC 60068-2-20 8

- surface mount : JEDEC J-STD-020E

ENVIRONMENTAL SPECIFICATIONS

• Standard actuation force : 3.5 N

• Max. actuation force : 100 N for 10 sec

• Travel : 1 mm

• Lifetime : >10,000,000 cycles

MECHANICAL SPECIFICATIONS

DISTINCTIVE FEATURES

10 x 10 mm; h=10.4 mm

Illuminated RAS option

Slip-on cap retention system - great for custom caps

Multimec

™

High performance tactile switches •

robust

• Housing : PPS UL94V0

• Actuator : PPS UL94V0

• Sealing : Silicone rubber

• Contacts spring : Stainless steel

Silver : +3 µAg

Gold : +1 µAu

• Fixed contacts :

Silver : SnCu + 2 µNI + 3 µAg

Gold : SnCu + 2 µNI + 1 µAu

• Terminals : SnCu + 2 µNI + 3 µSn100

MATERIALS

The company reserves the right to change specifications without notice. All tolerance if not otherwise specified ±0.2 mm.

PCB SWITCHES

MEC-MULTIMEC3F-2008

Summary of content (8 pages)

PAGE 1
08 EC M U -M M EC I LT PANEL PCB SWITCHES 20 3F Multimec™ 3F High performance tactile switches • robust DISTINCTIVE FEATURES 10 x 10 mm; h=10.
PAGE 2
6,4 10,4 High performance tactile switches • robust 3F - SMD 14 Ø 6,5 10 6,4 10,4 10 7,62 14 0,8 Ø 6,5 6,4 10,4 0,8 7,62 3F - TH Min 10,16 Max 12,5 0,3 Ø 6,5 10 6,4 10,4 10 0,8 0,3 Min 10,16 Max 12,5 7,62 Ø 6,5 0,8 7,62 3F - TH W/LED 10 10 2,54 2,54 3F - RAS 10 7,62 12 5,08 7,62 2 10 7,62 12 PCB SWITCHES Multimec™ 3F 5,08 7,62
PAGE 3
PANEL PCB SWITCHES Multimec™ 3F 5,5 6,0 10 12 High performance tactile switches • robust 5,08 2,54 3F - RAS W/LED 7,62 20,1 6,0 10 12 ±0,3 17,8 5,5 7,62 5,08 2,54 2,54 7,62 20,1 ±0,3 17,8 PCB LAYOUT & CIRCUIT DIAGRAM 7,62 2,54 4 2,5 Ø1,0(3x) 3 Ø1,0(3x) 2,54 1 3 Ø1,0(3x) 2,54 7,62 7,62 5,08 Ø1,0(4x) 7,62 5,08 7,62 3 +3 2,5 5,08 + Ø1,0(4x) 7,62 7,62 5,08 7,62 2,54 ø1.0 (4X) RAS bi-color illuminated 7,62 2,54 ø1.
PAGE 4
PCB SWITCHES Multimec™ 3F High performance tactile switches • robust BUILD YOUR PART NUMBER ILLUMINATED 3F MOUNTING SERIES TH9 LED through-hole OPTIONAL 05 blue Q quiet contact 20 green G gold contacts 40 yellow RAS 65 white 80 red 2040 green/yellow 8020 red/green 8040 red/yellow 24 high intensity green 46 high intensity yellow 87 high intensity red right angle NON-ILLUMINATED 3F MOUNTING SERIES TH9 through-hole SH9 surface mount OPTIONAL Q quiet contact RAS
PAGE 5
High performance tactile switches • robust OPERATING FORCE TAPE & REEL Tape and reel is available for the parts listed and has the following specifications FORCE 10 • Reel diameter: Ø330 mm 9 • Tape width: 24 mm • Pitch: see list 8 • Tape and reel material: antistatic or better • Quantity per reel: see list 7 ORDERING CODE PITCH QUANTITY PER REEL 3FSH9 3FSH9R 20 250 6 F(N) PART NO. 5 3,5N 3.
PAGE 6
PCB SWITCHES Multimec™ 3F High performance tactile switches • robust MOUNTING (CONTINUED) SPACE REQUIREMENT - MATRIX MOUNTING Through-hole (TH) Surface mount (SMD) MULTIMEC™ SPACING EXAMPLES 13.6 13.6 12.7 12.7 1V+1T+1V 1N+1N+1N SPACE REQUIREMENT - SWITCH/CAP Cap dimensions Switch spacing Panel cut-out 6 CAP SERIES RECOMMENDED MIN.SWITCH SPACING AxB NOMINAL CAP DIMENSION WxH RECOMMENDED MIN. PANEL CUT-CUT 1D/1E/1F 1GA 12.7x11.3 Ø9.6 Ø10.0 12.7x11.3 Ø11.0 Ø11.4 1GC 15.3x15.3 Ø15.
PAGE 7
High performance tactile switches • robust LED COMPONENT SPECIFICATIONS LED COMPONENT SPECIFICATIONS Color B G Y W R G/Y R/G R/Y G Y R Color Codes 05 20 40 65 80 2040 8020 8040 24 46 87 120 60 110 100 100/60 100/100 75/75 60 60 60 ABSOLUTE MAXIMUM RATINGS (Ta=25°C) Power mW 135 Current forward mA 30 30 20 30 30 30/20 30/30 30/30 25 25 25 Forward peak current mA 70 90** 80** 100 90** 120/80 120/120 160/140 60 60 60 Voltage reverse V 5 3 5 5
PAGE 8
PCB SWITCHES Multimec™ 3F High performance tactile switches • robust USAGE GUIDELINES HOW TO GET THE BEST RESULTS WITH MEC SWITCHES ? These guidelines are offered to users of MEC Switches as an aid to ensure successful and reliable switch operation. Please see the technical specifications for details on operating and storage temperatures and soldering guidelines to make sure you select the best switch for your application.