User manual

phone: [phone] / 30 100 – 0 | fax: - 11 | e-mail: [e-mail] | Web: www.mec-energietechnik.com
-- Instruction manual --
Atlas-300IM Battery Charger
IP 65 Lead-based battery charger
for Wet-, Gel-, AGM- and CA- batteries
+ Power supply mode
Version / MEC Art-No.
12V / 20A  171-06203-570IM 24V / 10A  171-12103-570IM
12V / 20A  171-06203-571IM 24V / 10A  171-12103-571IM
Dear Customer!
Thank you very much for your trust in us and our product.
Please read these operating instructions carefully before start of operation.
MEC-Energietechnik GmbH
1. Safety Rules and General Warnings
 Persons, which are not able to use the device in a safe way, because of their physical, sensory or mental competence, or
because of their inexperience, should not use the charger without control or instruction of a skilled person.
 90-264 Volts alternating current, device is not suitable for children – Danger of life!!!
 Avoid explosive gases, open flames and sparks – ensure for enough air ventilation while charging!
Explosion Risk!
 The charger is exclusively designed for rechargeable Lead-based batteries and must not be used for other purposes.
 Please consider the charging instructions from the battery manufacturer before charging!
 Do not open! Repair work must only be accomplished by authorized companies or specialized technical staff.
 If the mains connection of the device is damaged, it must be replaced with an original wire which is available at the manufac-
turer or costumer service.
 Never place the device on top of the battery while charging!
 Protect against direct solar radiation and temperatures over 40°C.
 In case of obvious damage or malfunction disconnect the device from mains supply and protect against unintended reconnec-
tion.
 The DC cable must not be cut or shortened.
 The charger is not designed for higher environments as IP 65