Technical Specs

6
Meazon S.A., 57, 57 N.E.O Patron - Athinon Str. 26442, Patra [e-mail]
[e-mail] [phone] www.meazon.com
Join the ZigBee Network
When the LED of Bizy Plug is blinking slowly, it means that the Bizy Plug is currently not joined in any
Zigbee network. After you press the button next the led once, the led will start flashing faster and the
device is going to start searching for a network to join. If the Bizy Plug is near a Zigbee coordinator or
router whose permit-join feature is enabled then the plug shall join that network. After joining a network
the Bizy Plug LED will stop blinking and settle down to on or off.
During normal operation (after the Bizy Plug has joined a network) the LED indicates the state of its
internal relay switch. If the LED is stable on, then the relay switch is also on and if the LED is off then the
relay switch is off.
For extra LED functionality consider reading the next subchapter.
Bizy Plug Man – Machine Interface
While the plug is connected to a network, the bellow rules apply.
Meazon Bizy Plug offers a button next to the LED.
Tap instantly the button in the specified location of the Bizy Plug and the Bizy Plug will toggle its relay
switch.
Hold the button of the Bizy Plug until the LED flashes once. If you stop pressing the button at that point,
the Bizy Plug will get into identifying mode. During identify mode the LED will be flashing.
If you continue pressing the button after the double flash, after a while the LED will flash 3 times. If you
stop pressing the button at that point the Bizy Plug will leave the network. This will restart the Bizy Plug
and it will be ready to join a fresh network.