User's Manual

Right side panel Bottom side

A: HDMI Jack-connect to HD TV set HDMI Host;

B: DC-IN Jack-5V/500mA~2A;

C: USB Host-play movies, pictures and music in USB Disk

and USB portable HD, connect Air Mouse;

D: USB OTG Host-connect PC USB host through USB cable

While use U1A as a USB disk, copy data from each device;

E: Factory Default key-when electrifying your U1A, press this

Key 10 seconds, then release the button.

F: TF Card Slot-Play Media file in TF (micro SD);

G: LED-light state-the LED keep lighting when U1A was electrified.

B. Initial operation

Connection instruction for Hardware

1. Connect to the TV set or LCD monitor .Set up the TV data receive mode to

HDMI port , (Refer to TV set user manual)

2. Suggest using Air mouse or 2.4G wireless mouse and keyboard. Plug 2.4G

receiver on USB Host connector. Or Plug on USB OTG port by port converter.

If only mouse plugged, the device will provide soft keyboard in operation

system. If the device detected the physical keyboard, the soft keyboard will be