Datasheet
Wireless DC multi-channel PWM dimmer
WPD-06
Connector description
Dimmer button description
CN0
CN1
CN2
CN3
CN4
Pin1
CN7 CN8
+-+-
+-+-+-+-
CN9
CN5
CN6
Function
CN1
CN2
CN3
CN4
CN5
CN6
CN7
CN8
CN9
Vin
Push dimming and other control
CN0
Vout_channel1
Vout_channel3
Vout_channel2
Vout_channel4
Vout_channel5
Vout_channel6
N.C.
N.C.
Matting connector
WAGO - 2092-1104/002-000
WAGO - 2092-1102/002-000
WAGO - 2092-1102/002-000
WAGO - 2092-1102/002-000
WAGO - 2092-1102/002-000
WAGO - 2092-1102/002-000
WAGO - 2092-1102/002-000
WAGO - 2091-1106/002-000
Wire thickness
or 2092-1102/002-000 x 2
0.2-2.5mm
2
0.2-2.5mm
2
0.2-2.5mm
2
0.2-2.5mm
2
0.2-2.5mm
2
0.2-2.5mm
2
0.2-2.5mm
2
0.2-1.5mm
2
Vin+Vin-Vin+Vin-
Pin No. Function
2
3
5
6
Optional coding plug1
Ground
Bypass input(default open)
Push dimming
Push dimming
4
Push dimming
CN9: Push dimming and other control Pin No. assignment
L (Learn) Button:
Pressing on this button enter the pairing mode. This is indicated by the first output blinking. Press L button again will jump to the next channel to pair
and allow leaving the pairing mode after the seventh(7) press.
If no other action follow the first press, the dimmer come back to its normal mode after two minutes.
C (Clear) Button:
In pairing mode, a long press (1.5sec) on the C button erases the pairing of the blinking output.
In normal mode, a long press (1.5sec) on the C button erases the 6 outputs of the dimmer and it will automatically enter the pairing mode on Channel 1.
Press L button 6 times to exit the pairing mode.
Remark: It is also possible to erase one switch from one channel (without erasing the other wireless batteryless switches paired on this output)
WPD-06