Data Sheet

SPECIFICATION
RSP-320-24RSP-320-15 RSP-320-27 RSP-320-36 RSP-320-48RSP-320-13.5
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.) Note.2
OUTPUT VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.4
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
ENVIRONMENT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER TEMPERATURE
SAFETY STANDARDS
SAFETY &
EMC
(Note 5)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
PROTECTION
24V15V 27V 36V 48V13.5V
13.4A21.4A 11.9A 8.9A 6.7A23.8A
0 ~ 13.4A0 ~ 21.4A 0 ~ 11.9A 0 ~ 8.9A 0 ~ 6.7A0 ~ 23.8A
321.6W321W 321.3W 320.4W 321.6W321.3W
150mVp-p150mVp-p 200mVp-p 220mVp-p 240mVp-p150mVp-p
12 ~ 15V 20 ~ 26.4V13.5 ~ 18V 26 ~ 31.5V 32.4 ~ 39.6V 41 ~ 56V
±1.0%±1.0% ±1.0% ±1.0% ±1.0%±1.0%
±0.2%±0.3% ±0.2% ±0.2% ±0.2%±0.3%
±0.5%±0.5% ±0.5% ±0.5% ±0.5%±0.5%
1500ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
8ms at full load 230VAC /115VAC
88 ~ 264VAC 124 ~ 370VDC
47 ~ 63Hz
PF>0.95/230VAC PF>0.98/115VAC at full load
88.5% 89% 89% 89.5% 90%88%
20A/115VAC 40A/230VAC
4A/115VAC 2A/230VAC
<1mA / 240VAC
105 ~ 135% rated output power
18.8 ~ 21.8V 27.6 ~ 32.4V 32.9 ~ 38.3V 41.4 ~ 48.6V 58.4 ~ 68V 15.7 ~ 18.4V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteriaA, EAC TP TC 020
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
-30 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
206.5K hrs min. MIL-HDBK-217F (25 )℃
215*115*30mm (L*W*H)
0.9Kg; 15pcs/14.5Kg/0.78CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that
it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
6. For charging related applications, please consult Mean Well for details.
7. Strongly recommended that external output capacitance should not exceed 5000uF.
( : - - . /- . /- /- /- . /- /- . /- )Only for RSP 320 2 5 3 345751213515
8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher ℃℃
than 2000m(6500ft).
AC CURRENT (Typ.)
EMC IMMUNITY
EMC EMISSION
RSP-320 series
320W Single Output with PFC Function
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, Class BEAC TP TC 020, CNS13438, GB9254 , GB17625.1
UL62368-1, TUV EN62368-1, .1, BSMI CNS14336-1 approvedCCC GB4943EAC TP TC 004, , AS/NZS 60950.1
File Name:RSP-320-SPEC 2019-12-16