Datasheet

1600W Power Supply with Single Output
RSP-1600 series
File Name:RSP-1600-SPEC 2018-12-10
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
LED
Green
Red
The power supply functions normally.
Description
Abnormal status (Over temperature protection, Overload protection, Fan fail.)
LED Status Indicators※
※ AC Input Terminal Pin No. Assignment
Pin No.
1
3
2
Assignment Diagram Maximum mounting torque
8Kgf-cm
AC/N
AC/L
FG
Pin No.
Pin No.
1,2
1,2
7
8
5,6
3,4
Function
Function
DA
Terminal
resistance
NC
NC
SDA
SCL
CANH
CANL
-V (Signal)
DB
Description
Description
Differential digital signal for parallel control.
SW1 is the selector of terminal resistor that is designed for DA/DB signals and parallel control function.
Differential digital signal for parallel control.
For standard model: None.
For standard model: None.
For PMBus model: Serial Data used in the PMBus interface. (Note)
For PMBus model: Serial Clock used in the PMBus interface. (Note)
For CANBus model: Data line used in CANBus interface. (Note)
For CANBus model: Data line used in CANBus interface. (Note)
※ Control Pin No. Assignment(SW1)
7
8
1
2
※ Control Pin No. Assignment( ) : HRS DF11-8DP-2DS or equivalentCN500
Mating Housing
Terminal
HRS DF11-8DS or equivalent
HRS DF11-**SC or equivalent
Negative output voltage signal.
It is for certain function reference; it cannot be connected directly to the load.
Note: Isolated signal, referenced to GND-AUX.