Data Sheet

ManualsBrandsMEAN WELL ManualsPOWERDC Power Supply 1.5kW 12V 125A

■ Model Encoding / Order Information

■ Description

RSP-1600 is a 1.6KW single output enclosed type AC/DC power supply with a 1U low profile and a high

power density up to 25W/inch . This series operates for 90~264VAC input voltage and offers the models

with the DC output mostly demanded from the industry. Each model is cooled by the thermostatically

controlled fan. Moreover, RSP-1600 provides vast design flexibility by equipping various built-in functions

such as the output programming, active current sharing, remote ON-OFF control, auxiliary power, etc.

Safety: UL/EN/IEC 60950-1

EMC: EN 55032 / 55024

Factory control or automation apparatus

Test and measurement instrument

Laser related machine

Aging facility

Digital broadcasting

Constant current source

Redundant system

■ Features ■ Certificates

■ Applications



Universal AC input / Full range

(Withstand 300VAC surge input for 5 seconds)

Built-in active PFC function

High efficiency up to 93%

Forced air cooling by built-in DC fan

Output voltage and constant current level programmable

Active current sharing up to 9600W (5+1)

Built-in remote ON-OFF control / remote sense /

auxiliary power DC OK signal / OTP alarm signal



Protections: Short circuit / Overload / Over voltage

/ Over temperature

Optional PMBus or CANBus protocol

5 years warranty

1600W Power Supply with Single Output

RSP-1600 series

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

3.35

Dimension

300

11.8

41 (1U)

(1U)

inch1.61

File Name:RSP-1600-SPEC 2018-01-15

Type

Communication Protocol

CAN

Blank None

PMBus protocol

CANBus protocol

Note

By request

In Stock

Output wattage

Communication protocol option

Output voltage (12V/24V/27V/36V/48V)

48RSP - -1600

Series name

Summary of content (8 pages)

PAGE 1
RSP-1600 1600W Power Supply with Single Output series Dimension * W * H L 300 * 85 * 41 (1U) 11.8 * 3.35 * 1.61 (1U) mm inch Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.
PAGE 2
RSP-1600 1600W Power Supply with Single Output series SPECIFICATION MODEL OUTPUT RSP-1600-12 RSP-1600-24 RSP-1600-27 RSP-1600-36 RSP-1600-48 DC VOLTAGE 12V 24V 27V 36V 48V RATED CURRENT 125A 67A 59A 44.5A 33.5A CURRENT RANGE 0 ~ 125A 0 ~ 67A 0 ~ 59A 0 ~ 44.5A 0 ~ 33.5A RATED POWER 1500W 1608W 1593W 1602W 1608W RIPPLE & NOISE (max.) Note.2 150mVp-p 200mVp-p 200mVp-p 250mVp-p 300mVp-p 11.5 ~ 15V 23.5 ~ 30V ±1.0% 26.5 ~ 33.5V ±1.0% 35.5 ~ 45V ±1.0% 47.5 ~ 58.8V ±1.
PAGE 3
RSP-1600 1600W Power Supply with Single Output series Block Diagram PFC fosc : 90KHz PWM fosc : 70KHz +S ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS & PFC ORING FET RECTIFIERS & FILTER POWER SWITCHING +V -V -S O.V.P. DETECTION CIRCUIT PV/PC DA/DB TRANSCEIVERS DETECTION CIRCUIT MCU MCU T-Alarm DC-OK SDA/SCL or CANH/CANL DATA ISOLATION ( O.T.P. FAN AUX POWER Remote ON-OFF 12V/0.8A AUX POWER 5V/0.
PAGE 4
RSP-1600 1600W Power Supply with Single Output series Function Manual 1. Voltage Drop Compensation 1.1 Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V +V PIN15 +S LOAD PIN16 -S -V -V CN1 +V Sense lines should be twisted in pairs to minimize noise pick-up. ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. 1.
PAGE 5
RSP-1600 1600W Power Supply with Single Output series 3. Constant Current Level Programming (or, PC / remote current programming / dynamic current trim) ※ The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE. Iout PIN11 PC -V CN1 +V OUTPUT CURRENT (%) 110 PIN14 -V(signal) EXTERNAL VOLTAGE (DC) 100 Non-Linear 20 ◎ For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section. 0.4 1 4.7 5 V EXTERNAL VOLTAGE (VDC) 4.
PAGE 6
RSP-1600 1600W Power Supply with Single Output series 6.Current Sharing with Remote Sense RSP-1600 has the built-in active current sharing function and can be connected in parallel, up to 6 units, to provide higher output power as exhibited below : ※ The power supplies should be paralleled using short and large diameter wiring and then connected to the load. ※ Difference of output voltages among parallel units should be less than 0.2V.
PAGE 7
1600W Power Supply with Single Output RSP-1600 series Mechanical Specification Case No.250 5.8 Unit:mm 252 22.8 21.6 29.6 30 2-M4 L=5 20 28 1 1 2 1 2 -V +V Air flow direction SVR (Top View) 10 1 85 8 2 SW1 7 LED 1 15 16 2 I/P 9 3 2 2 6. ψ 12 max. 5.8 41 22.8 13 5 2-M4 L=5 2-M3 252 300 1 70 1 (Bottom View) 3-M3 L=4 7.5 1 42.5 CN1 CN500 38 16.1 264.7 ※ Mounting Instruction Hole No. 1 2 Mounting Surface Recommended Screw Size M3 M4 MAX.
PAGE 8
1600W Power Supply with Single Output RSP-1600 series ※ LED Status Indicators LED Green Red Description The power supply functions normally. Abnormal status (Over temperature protection, Overload protection, Fan fail.) ※ AC Input Terminal Pin No. Assignment Pin No. 1 2 3 Assignment FG AC/N AC/L Diagram Maximum mounting torque 8Kgf-cm ※ Control Pin No.