Data Sheet

※ KNXInterface
60W PWM Output KNX LED Driver
PWM-60-KN series
File Name:PWM-60-KN-SPEC 2019-12-19
Apply KNX signal between KNX+ and KNX-.
The application program(database) can be downloaded via Online Catalogs from ETS or via http://www.meanwell.com/productCatalog.aspx
DescriptionParametrization options
Switch functions Turn on brightness
Dimming speed for turn on/off
Switch telegram and status
Switch on/off delay
Dimming Dimming speed for 0~100%
Allow switch on via relative dimming
Brightness value Dimming speed for transition brightness values
Permit set switch on and off brightness via value
Brightness value and status
Fault message Lamp fault
Other functions Reaction on KNX voltage failure/recovery
Power-On level
Dimming curve select(linear/log)
Block function(Block1&Block2)
Staircase lighting function(multi-stage switch-off)
Output PWM frequency value
General function
Cyclic monitoring telegram(In operation)
8 Scenes
Recall and save via KNX with 8-bit telegram
Operating hours & CLO
Operating hours counter
Power consumption feedback
Power consumption report
Constant light out(5 scheduled divisions)
Temperature measurement
Temperature report,optional to report Tunit/Tamb temperature
Tuint:Unit internal temperature
Tamb:Conver Tunit to ambient temperature
Temperature Alarm protection
Eliminate temperature Alarm protection via object/automatic