Owner's Manual

File Name:NPP-750-SPEC 2021-10-26
Charger OK / DC OK signal is a TTL level signal.
The maximum sourcing current is 10mA.
Charger OK / DC OK signal
"High" : 4.5 ~ 5.5V
Charger status
Work normally
Failure or protection function activated
"Low" : -0.5 ~ 0.5V
3.Charger OK / DC OK Signal
21
14 13
PIN 6 Charger OK / DC OK
PIN 9 & 10 GND-AUX
The NPP-750 can be turned ON/OFF by using the "Remote Control" function.
4.Remote ON-OFF Control
Between pin7 remote ON-OFF and pin8 +12Vaux
Charger status
ON (Default)
OFF
Short ( Pin 7 = 10.8 ~ 13.2V)
Open Pin 7 =( -0.5 ~ 0.5V)
21
14 13
PIN 7 Remote ON-OFF
PIN 8 +12Vaux
50%
75%
100%
Jumper(Pin 7 & 8)
21
14 13
50%
75%
100%
※ V x I must be less than or equal to the rated power. Please refer to derating curve (page 4) .OO
750W High Reliable Ultra Wide Output Range Battery Charger & Power Supply 2-in-1
NPP-750 series