Datasheet

SPECIFICATION
MODEL
INPUT
SAFETY &
EMC
01A.
VOLTAGE RANGE
7W Typ(.)
Three buttons( , Prg/Set, ESC) on the front panel to set and view the settingsMove
KNX BUS
COMMUNICATION
SIGNAL
FUNCTION
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
VIBRATION
OVER VOLTAGE CATEGORY
POLLUTION DEGREE
PROTECTION TYPE
SAFETY STANDARDS
DISPLAY
DIMENSION
OVERLOAD
AC CURRENT
POWER CONSUMPTION
100 240 AC 142 339VDC~V, ~
100% at DALI rated current
Protection type: Constant current limiting
LCD Display of 2 lines with 12 characters each for comission the device and parameter settings-
86*72*55mm (L*W*H)-Weight 0.2Kg
250mA
Standard KNX connector
Built-in DALI Voltage 16-20VDC ; Screw terminal for solid or stranded copper conductors 1-2.5m
2
100MB s via RJ45 connector/
K-4DA 6
ENVIRONMENT
PROTECTION
EMC EMISSION
OTHERS
KNX PROGRAMMING
One physical button to toggle between normal and addressing modeprogramming/
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input and 25 of ambient temperature.℃
2. Maximum allowable DALI driver is 64.
3. The devices may be operated only up to 2000m(6500ft).
TERMINAL
Screw terminal for solid or stranded copper conductors 1-2.5m
2
EMC IMMUNITY
FREQUENCY RANGE
DIN RAIL MOUNTING 35 mm rail ; 4 units wide
DALI BUS RATED CURRENT
ETHERNET
DALI BUS VOLTAGE
DALI STANDARDS Comply with , -IEC60926 EN62386 103 DALI controller
Compliance to EN50491-5-1, EN60669-2-1, EN50428, EN50090-2-2, EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,11
ENCLOSURE MATERIAL ABS-V0
GENERIC SETTING
50 60Hz~
-5 ~ +45℃
5 ~ 93% RH non-condensing comply with climatic EN50090 2 2;--
-25 ~ +70 , 10 ~ 95% RH non-condensing℃
5 ~ 150Hz, each along X, Y, Z axes according to EN50090-2-2
III
2, EN60664-1
IP20, EN60529
Compliance to EN60669-2-1, EN50428, EN50090-2-2
KDA-64
KNX to DALI Gateway
File Name:KDA-64-SPEC 2017-09-27