Datasheet

ManualsBrandsMEAN WELL ManualsLED DriversLED Driver 45W 1.05A 43V

Constant Current mode output

Flicker free design

Plastic housing with class II design

Built-in active PFC function

No load power consumption<0.5W(Blank-Type),

Standby power consumption<0.5W(DA-Type)

Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output; DAL

3 years warranty

■ Model Encoding

■ Description

■ Features ■ Applications



LED panel lighting

LED flood lighting

Indoor LED lighting

Rated output current(350/500/700/1050/1400mA)

Rated wattage

Series name

500

IDLC

File Name:IDLC-45-SPEC 2018-01-10

IDLC-45 series is a 45W LED AC/DC driver featuring the constant current mode output with flicker

free design.IDLC-45 operates from 90~295VAC and offers models with different rated current

ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the fanless design,

the entire series is able to operate for -20 ~+85 case temperature under free air convection.℃℃

IDLC-45 is equipped with various function options, such as dimming methodologies, so as to

provide the optimal design flexibility for lighting system.

M M

SELV

Function options

Type

Blank

Function Note

In Stock

45W Constant Current Mode LED Driver

IDLC-45 series

2 in 1 dimming (0~10VDC and 10V PWM)

(for DA-Type only)

DALI control technology

A:Auxiliary DC output(12V@50mA)

:None

{

Note: The DALI control model(DA Type) only for IDLC-45 Non Auxiliary DC output models.

IS 15885(Part 2/Sec13)

R-41027766

THOMAS SAMUEL

(for IDLC-45-500,500DA,700,

700DA,1050,1050DA only)

(except for DA-Type)

Summary of content (6 pages)

PAGE 1
IDLC-45 45W Constant Current Mode LED Driver series IS 15885(Part 2/Sec13) M (for DA-Type only) M SELV THOMAS SAMUEL THOMAS SAMUEL S&E R-41027766 (for IDLC-45-500,500DA,700, (except for DA-Type) 700DA,1050,1050DA only) ■ Features Constant Current mode output Flicker free design Plastic housing with class II design Built-in active PFC function No load power consumption<0.5W(Blank-Type), ■ Applications LED panel lighting LED flood lighting Indoor LED lighting Standby power consumption<0.
PAGE 2
IDLC-45 45W Constant Current Mode LED Driver series SPECIFICATION IDLC-45 -350 IDLC-45 -500 IDLC-45 -700 IDLC-45 -1050 IDLC-45 -1400 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA RATED POWER 33.25W 45W 44.8W 45.15W 44.8W CONSTANT CURRENT REGION Note.2 57 ~ 95V 54 ~ 90V 38 ~ 64V 26 ~ 43V 19 ~ 32V OPEN CIRCUIT VOLTAGE(max.) 118V 115V 84V 63V 50V 84% 83% MODEL OUTPUT CURRENT RIPPLE 5% max. @rated current CURRENT TOLERANCE ±7.
PAGE 3
IDLC-45 45W Constant Current Mode LED Driver series Block Diagram fosc : 70KHz AUX+(for IDLC-45A) AUX-(for IDLC-45A) RECTIFIERS I/P EMI FILTER & RECTIFIERS RECTIFIERS & FILTER POWER SWITCHING O.L.P. PWM&PFC CONTROL CURRENT LIMIT Vo+ VoDIM+(DA+) DIM-(DA-) DETECTION CIRCUIT DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs.
PAGE 4
IDLC-45 45W Constant Current Mode LED Driver series DIMMING OPERATION ACL ACL ACN ACN TB1 DIM+(DA+) DIM-(DA-) Vo+ TB2 Vo- ※ 2 in 1 dimming function Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
PAGE 5
IDLC-45 45W Constant Current Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 90~295VAC for 350mA Model,200~295VAC for others 90~295VAC for 350mA Model,200~295VAC for others 100 100 80 80 90~200VAC for models other than 350mA Model 40 20 -20 -10 0 10 20 90~200VAC for models other than 350mA Model 60 LOAD (%) LOAD (%) 60 30 (HORIZONTAL) 40 40 20 -20 -10 0 15 30 45 60 (HORIZONTAL) 85 Tcase (℃) AMBIENT TEMPERATURE,Ta (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERI
PAGE 6
IDLC-45 45W Constant Current Mode LED Driver series MECHANICAL SPECIFICATION Case No.IDLC-45A Unit:mm 120 tc : Max. Case Temperature 1 2 3 TB1 4 6.5 75 1 2 3 TB2 4 5 6 tc 30 30 2 *ψ4.3 6.5 6.5 3 25 6.5 Terminal Pin No. Assignment(TB1) Pin No. 1 2 3 4 Assignment ACL ACL ACN ACN IDLC-45 Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 4 Assignment DIM+(DA+) DIM-(DA-) Vo+ Vo- IDLC-45A Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 Assignment DIM+ DIMVo+ Pin No.