Datasheet

ManualsBrandsMEAN WELL ManualsLED DriversLED Driver 25W 700mA 36V

Constant Current mode output

Flicker free design

Plastic housing with class II design

Built-in active PFC function

No load power consumption<0.5W(Blank-Type)

Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output

3 years warranty

■ Model Encoding

■ Description

■ Features ■ Applications



LED panel lighting

LED flood lighting

Indoor LED lighting

Rated output current(350/500/700/1050mA)

Rated wattage

Series name

500

IDLC

File Name:IDLC-25-SPEC 2018-01-10

IDLC-25 series is a 25W LED AC/DC driver featuring the constant current mode output with flicker

free design.IDLC-25 operates from 90~295VAC and offers models with different rated current

ranging between 350mA and 1050mA. Thanks to the efficiency up to 82%, with the fanless design,

the entire series is able to operate for -20 ~+90 case temperature under free air convection.℃℃

IDLC-25 is equipped with various function options, such as dimming methodologies, so as to

provide the optimal design flexibility for lighting system.

M M

SELV

Function options

Type

Blank

Function Note

In Stock

25W Constant Current Mode LED Driver

IDLC-25 series

2 in 1 dimming (0~10VDC and 10V PWM)

2 in 1 dimming

and Auxiliary DC output

IS 15885(Part 2/Sec13)

R-41027766

THOMAS SAMUEL

(for IDLC-25-700 only)

Summary of content (6 pages)

PAGE 1
IDLC-25 25W Constant Current Mode LED Driver series IS 15885(Part 2/Sec13) M M SELV THOMAS SAMUEL THOMAS SAMUEL R-41027766 S&E (for IDLC-25-700 only) ■ Features Constant Current mode output Flicker free design Plastic housing with class II design Built-in active PFC function No load power consumption<0.
PAGE 2
IDLC-25 25W Constant Current Mode LED Driver series SPECIFICATION IDLC-25 -350 IDLC-25 -500 IDLC-25 -700 IDLC-25 -1050 RATED CURRENT 350mA 500mA 700mA 1050mA RATED POWER 24.5W 25W 25.2W 25.2W CONSTANT CURRENT REGION Note.2 49 ~ 70V 35 ~ 50V 25.2 ~ 36V 16.8 ~ 24V OPEN CIRCUIT VOLTAGE(max.) 100V 75V 63V 36V MODEL OUTPUT CURRENT RIPPLE 5.0% max. @rated current CURRENT TOLERANCE ±7.0% SETUP TIME 500ms / 230VAC 1200ms/115VAC Note.4 AUXILIARY DC OUTPUT Note.
PAGE 3
IDLC-25 25W Constant Current Mode LED Driver series Block Diagram fosc : 70KHz AUX+(for A-Type) AUX-(for A-Type) RECTIFIERS I/P EMI FILTER & RECTIFIERS RECTIFIERS & FILTER POWER SWITCHING O.L.P. PWM&PFC CONTROL CURRENT LIMIT Vo+ VoDIM+ DIM- DETECTION CIRCUIT DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems.
PAGE 4
IDLC-25 25W Constant Current Mode LED Driver series DIMMING OPERATION ※ 2 in 1 dimming function ACL ACL ACN ACN DIMDIM+ AUXAUX+ VoVo+ Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
PAGE 5
IDLC-25 25W Constant Current Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 80 80 60 60 LOAD (%) 100 LOAD (%) 100 40 20 -20 -10 0 5 15 25 35 40 20 (HORIZONTAL) 45 -20 -10 AMBIENT TEMPERATURE,Ta (℃) 0 15 30 45 60 90 (HORIZONTAL) 80 Tcase (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC 100 1 90 0.98 80 0.96 277V 70 0.94 60 50 0.92 40 0.9 90 230V PF LOAD (%) ※ Tcase at 75℃ 100 135 180 0.
PAGE 6
IDLC-25 25W Constant Current Mode LED Driver series MECHANICAL SPECIFICATION ※ Blank-Type Case No.IDLC-25A 6.5 tc 6.5 110 Unit:mm : Max. Case Temperature 1 2 3 TB1 4 75 2 *ψ4.3 1 2 TB2 35 35 6.5 3 4 tc 3 22 6.5 Terminal Pin No. Assignment(TB1) Pin No. 1 2 3 4 Assignment ACL ACL ACN ACN Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 4 Assignment DIMDIM+ VoVo+ ※ A-Type tc : Max. Case Temperature 1 2 3 TB1 4 75 2 *ψ4.3 6.5 1 2 3 TB2 4 5 6 tc 35 35 6.5 6.