Datasheet

File Name:HSP-200-SPEC 2018-01-09
1.Operate with additional aluminum plate
on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and
smooth surface (or coated with thermal grease), and HSP-200 series must be firmly mounted at the center of the aluminum plate.
In order to meet the“Derating Curve”and the “Static Characteristics” ,HSP-200 series must be installed onto an aluminum plate(or the cabinet of the same size)
Installation
2.For heat dissipation, at least 5cm installation distance around the PSU should be kept, shown as below:
13
SVR1
5cm
5
cm
5
cm
5cm
5
cm
M3*4
3
450
450
HSP-200 series
200W Single Output with PFC Function