Datasheet

ManualsBrandsMEAN WELL ManualsPOWER1 Output Embedded Switch Mode Power Supply, 1.08kW, 24V, 42A

HEP-1000 series

1000W Power Supply for Harsh EnvironmentSwitching

■ Applications

■ Description



Industrial automation machinery

Industrial control system

Mechanical and electrical equipment

Electronic instruments, equipments

or apparatus

Household appliances



Built-in active PFC function

High efficiency up to 96%

Fanless design, cooling by free air convection

Aluminum case and filling with heat-conducted glue

Withstand 10G vibration test

-40 ~ +70 wide operating range℃

Charger for lead-acid batteries (flooded, Gel and AGM) and

Li-ion batteries (lithium iron and lithium manganese)

Built-in default 2/3 stage charging curves and programmable

curve

Built-in protocol / Optional CANBus protocolPMBus

Output voltage and constant current level programmable

Protections: Short circuit / Overload /

Over voltage / Over temperature

Built-in remote ON-OFF control

DC OK active signal

LED indicator for power on

O ptional wiring type with IP67 rating

6 years warranty

■ Features

■ Model Encoding



Safety: UL/EN62368-1

EMC: EN 55032 / 55024

HEP --1000 24

IP67

(Optional)

safety regulations such as TUV EN62368-1 UL62368-1, and the design refers to EN61558-1 and EN60335-1

HEP-1000 series serves as a high performance power supply solution for various industrial applications.

UL62368-1 EN62368-1

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

TPTC004

IEC62368-1

■ Certificates

HEP-1000 is a 1000W industrial AC/DC power supply featuring the outstanding capability to operate

under highly humid, dusty, oily, and high-vibration harsh environment. The entire series is housed with the

aluminum case and fully potted with heat-conducted silicone.Adopting the full range 90~305VAC input,

the entire series provides an output voltage line of 24V, 48V and 100V. In addition to the high efficiency up

to 96%, that the whole series operates from -40 70

℃~ ℃ . -under air convection without fan HEP 100 has

the complete protection functions and 10G anti-vibration capability ; It is complied with the international

Communication protocol option

Output voltage

Rated wattage

Series name

Type

Communication Protocol

Note

Blank PMBus protocol

In Stock

CAN CANBus protocol

By request

File Name:HEP-1000-SPEC 2019-09-25

Summary of content (7 pages)

PAGE 1
000W Switching Power Supply for Harsh Environment IP67 HEP-1000 series Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.
PAGE 2
1000W Switching Power Supply for Harsh Environment HEP-1000 series SPECIFICATION FOR POWER SUPPLY MODEL HEP-1000-24 HEP-1000-48 HEP-1000-100 DC VOLTAGE 24V 48V 100V RATED CURRENT 42A 21A 10A RATED POWER 1008W 1008W 1000W 250mVp-p 500mVp-p RIPPLE & NOISE (max.) Note.2 200mVp-p OUTPUT By built-in potentiometer, SVR 24 ~ 30V VOLTAGE ADJ. RANGE 48 ~ 60V 100 ~ 125V VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.
PAGE 3
1000W Switching Power Supply for Harsh Environment HEP-1000 series SPECIFICATION FOR CHARGER MODEL OUTPUT HEP-1000-48 HEP-1000-100 BOOST CHARGE VOLTAGE Vboost 28.8V HEP-1000-24 57.6V 115.2V FLOAT CHARGE VOLTAGE Vfloat 27.6V 55.2V 110.4V RECOMMENDED BATTERY 120 ~ 350AH CAPACITY(AMP HOURS)(Note 2) 60 ~ 175AH 30 ~ 85AH 17.5A 8.7A BATTERY TYPE Open & Sealed Lead Acid OUTPUT CURRENT VOLTAGE RANGE INPUT 35A Note 3 90 ~ 305VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.
PAGE 4
HEP-1000 1000W Switching Power Supply for Harsh Environment series BLOCK DIAGRAM PFC fosc : 70KHz PWM fosc : 65KHz ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS & PFC RECTIFIERS & FILTER POWER SWITCHING +V -V O.V.P. DETECTION CIRCUIT PWM CONTROL PFC CONTROL PV PC O.T.P. DETECTION CIRCUIT MCU MCU DATA ISOLATION DC OK Remote ON-OFF DATA ISOLATION PM BUS or CAN BUS O.T.P. RECTIFIERS & FILTER AUX POWER DERATING CURVE 12V/0.
PAGE 5
HEP-1000 1000W Switching Power Supply for Harsh Environment series FUNCTION MANUAL 1.Charging Curve ※ By default, the HEP-1000 operates in power supply mode, and it can be configured to charger mode by PMBus, CANBus, or SBP-001. ※ By factory default, this charger performs the default curve which can be programmed via PMBus and CANBus. ※ To accommodate the parameters of the charging curve, SBP-001, the smart battery charging programmer designed by MEAN WELL, and a personal computer are needed.
PAGE 6
1000W Switching Power Supply for Harsh Environment HEP-1000 series 4.Output Current Programming (or, PC / remote current programming / dynamic current trim) ※ The output current can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE. OUTPUT CURRENT(%) Iout PIN2 PC CN71 EXTERNAL VOLTAGE (DC) PIN3 & 4 -GND-signal 110 100 Non-Linear 20 0 0.4 1 4.7 4.8 V EXTERNAL VOLTAGE (DC) 5.
PAGE 7
1000W Switching Power Supply for Harsh Environment HEP-1000 MECHANICAL SPECIFICATION Case No.228F series Unit:mm 310 13.4 283.2 1 144 2 2 4 4 -ψ4.5 4 -ψ6 Address 1 2 O/P 9.25 3 3 Vo Adj. LED 3 15 4 1 13 2 14 7 CN71 5.7 19.3 max. 19.3 max. 48.5 I/P 97 1 11 15 7 8.9 5.7 ※ Output voltage current level can be adjusted through internal potentiometer.(Vo Adj.) (Can access by removing the rubber stopper on the case.) ※ PMBus interface address selection.