Data Sheet

SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
Note.2
RATED CURRENT
CURRENT RANGE
RATED POWER (max.)
RIPPLE & NOISE (max.)
Note.3
OUTPUT
SETUP, RISE, HOLD UP TIME
VOLTAGE RANGE
Note.7
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT
INPUT
ENVIRONMENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
LIFE
MTBF
DIMENSION
OTHERS
NOTE
PACKING
PROTECTION
5V 9V7.5V 12V 15V 18V 24V 48V
GSM12E05 GSM12E07 GSM12E09 GSM12E12 GSM12E15 GSM12E18 GSM12E24 GSM12E48
GSM12E07-P1J GSM12E09-P1J GSM12E12-P1J GSM12E15-P1J GSM12E18-P1J GSM12E24-P1J GSM12E48-P1J
2.4A 1.33A1.6A 1A 0.8A 0.66A 0.5A 0.25A
0 ~ 2.4A 0 ~ 1.33A0 ~ 1.6A
0 ~ 1A
0 ~ 0.8A 0 ~ 0.66A 0 ~ 0.5A
60mVp-p 60mVp-p60mVp-p 80mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p
VOLTAGE TOLERANCE
Note.4
LINE REGULATION Note.5
LOAD REGULATION Note.6
±5.0% ±4.0%±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0%
±1.0% ±1.0%±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
±5.0% ±4.0%±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0%
80 ~ 264VAC 113 ~ 370VDC
47 ~ 63Hz
0.4A / 115VAC 0.2A / 230VAC
WITHSTAND VOLTAGE
I/P-O/P:5656VDC
TUV EN60601-1/EN60601-1-11 (3.1 version), approvedEAC TP TC 004
GSM12E05-USB without EN60601-1-11
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃
3 years : 100% load 40 , 12hours / day℃
400Khrs min. MIL-HDBK-217F(25 )℃
-20 ~ +70 (Refer to "Derating Curve")℃
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH non-condensing℃
±℃℃0.03% / (0 ~ 40 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
62.2*27.4*39.7mm (L*W*H)
CONNECTOR
PLUG
CABLE
12W 12W12W 12W 12W 12W 12W 12W
0 ~ 0.25A
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. ℃
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 f & 47 f capacitor. μμ
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 10% to 100% rated load.
7.Derating may be needed under low input voltage. Please check the derating curve for more details.
8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
OVERLOAD
OVER VOLTAGE
110 ~ 200% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
110 ~ 140% rated output voltage
Protection type : Clamp by zener diode, output short
500ms, 30ms, 16ms/230VAC 500ms, 30ms, 16ms/115VAC at full load
80% 82%82% 82.5% 84% 85% 85% 87%
See page 4 5 ; other type available by customer requested~
100g, 90pcs / 10kg / CARTON for cable connection ; 76g, 150pcs / 12.5kg / CARTON for USB connection
See page 4 5 ; other type available by customer requested~
Touch current < 0 A/264VAC10 μ
Level 3, 10V/m(80MHz~2.7GHz)
Table 9, 9~28V/m(385MHz~5.78GHz)
GSM12E series
12W AC-DC Reliable Green MedicalAdaptor
GSM12E05-
=P1J
USB
SAFETY &
EMC
(Note. 8)
ISOLATION RESISTANCE
Parameter
Parameter
ESD
Standard
Standard
EN61000-3-2
EN55011 (CISPR11)
EN55011 (CISPR11)
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level / Note
Test Level / Note
Class B
Class B
Class A
-----
EMC IMMUNITY
EMC EMISSION
EN55024 , EN60601-1-2, EN61204-3
Level 4, 15KV air ; Level 4, 8KV contact
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
Level 3, 1KV/Line-Line
Level 4, 30A/m
Level 2, 3V
Level 3, 2KV
RF field susceptibility
EFT bursts
Surge susceptibility
Conducted susceptibility
Magnetic field immunity
Voltage dip, interruption
Conducted emission
Radiated emission
Harmonic current
Voltage flicker
ISOLATION LEVEL
Pimary - Secondary: 2 x MOPP
File Name:GSM12E-SPEC 2018-09-28
30A / 115VAC 60A / 230VACCold start