240W DIN Rail Type DC-DC Converter series Features H Applications « Compliance to EN501556 and EN45545-2 railway standard * Bus,tram,metro or railway system * Width only 40mm * Industrial control system * 2:1 wide input range * Semi-conductor fabrication equipment + wide working temperature * Factory automation + 150% peak load capability * Electrode-mechanical * Current sharing up to * Wireless network * DC output adjustable * Telecommute or data com system *« Cooling by free air convection + Can be instal
DD-240 series 240W DIN Rail Type DC-DC Converter HDC OK Relay Canto Contact Close Sputum Contact Open PSU turns off / DC Fail. Contact Ratings (max } 30VMA resistivity load. |W Function Manual 1. Current sharing {1} Parallel operation is available by connecting the units shown as below are connected mutually in parallel) : {2) The voltage difference among each output should bs minimized that less than 0.
240W DIN Rail Type DC-DC Converter series A Input Fuse There is one fuse connected in series to the positive input line, which is used to protect against abnormal surge. Fuse specifications of each mode! are shown as below. Type Fuse Typ Reference and Rating B Conquer MST, 10A, 250V*2 Cc Conquer MST, 6.9A, 250V*2 D Conquer MST, 6.3A, 250V*1 u Input Under-Voltage Protraction If input voltage drops blow Vi min, the internal control! IC shuts down and there is no output voltage.
240W DIN Rail Type DC-DC Converter DD-240 series u Efficiency vs Load 8 Vin Curve DD R-240B-24 0K IW i Box | Zane Hux GOK 70% GON SO% 100% LOAD DD R-240C-24 Owe Li DD R-240D-24 ror Zeno Yo ox 75% [iy LOAD The efficiency vs load & Vin curves of sate model are shown as below.
winch weir] 240W DIN Rail Type DC-DC Converter series W immunity t6 Environmental Conditions Test method Standard Test conditions Status EN 50155 section 12.2.3 (Column 2, Class TX) Temperature: 40°C Coaling Test Thieve (¢ ) Duel Tums: 2 hrsloyco No damage EN 50155 section 12.2.4 {Column 2, Class TX) } Dry Heat Test EN50155 salon 12.24 Column’, Ass TX A Column 4, Class TX) | Liberators: TOC 85 | PG EN 60068-2:2 : Temperature; Damp Heat Test, Cyclic ow Se sexton 1225 Humidity: RH PASS Duration: 48 hrs.
240W DIN Rail Type DC-DC Converter series HN Mechanical Specification Casanova-D Unit mm Terminal Pin No. Assignment (TB2,TB3) Pin No_ | Assignment 1.2 | DC output +Vo 55 | DC output Vo 34 | Correlated Contact 78 | Pep. 1135 125.2 Side View Side View Terminal Pin No. Assignment (TB1) Pin No. | Assignment Depute Vin 3 | DC input vine 4 | Remote ON/OFF Au Installation Instruction This series fits DIN rail TS35/7.
