User manual

• Flashes twice when battery power is low.

B. BATTERY COMPARTMENT

• Holds two AA-size batteries

C. RESET

• Resets all previous settings

D. CHANNEL SWITCH

• Selects the desired channel -1, 2 or 3

E. WALL-MOUNT RECESSED OPENING

• Keeps the remote sensor on the wall

F. °C/ °F SWITCH

• Selects the temperature display in Celsius or Fahrenheit

BEFORE YOU BEGIN

• We recommend using alkaline batteries for the remote sensor and

main unit when temperatures are above 32°F (0°C). We recommend

using lithium batteries for the remote sensor when temperatures are

below 32°F (0°C).

• Avoid using rechargeable batteries. (Rechargeable batteries cannot

maintain correct power requirements).

• ALWAYS install batteries in the remote sensor before the main unit.

• Insert batteries before first use, matching the polarity in the battery

compartment

• Press RESET after each battery change with a paper clip or similar

tool.

• Remove protective plastic screen from LCD display (if any).

• During an initial setup, place the main unit close to the remote sensor.

• After reception is established (the remote temperature will appear on

the main unit’s display), position the remote sensor and the main unit