Setup guide



It is recommended that, on completion of the WTS

hardware setup, the Meade Virtual Link software is then

congured.To do this, simply select  and click 

at thefollowing screen.

  Then install USB device connection utility, Meade Virtual

Link. Please refer to the “Meade Virtual Link User‘s

Guide“.





Restart this product for the new settings to take effect.

 To reect the wireless conguration, disconnect the power

plug from the outlet and unplug the network cable.

Do not unplug the network cable when using this product

with a wired LAN.

The MEADE WTS 1.0 will be placed on or next to the

telescope. Via an active (power supplied) USB Hub (optio-

nal) all telescope specic and camera specic USB Ports

can be connected to the WTS. All telescope accessories

with RS232 ports can be connected through an optional

USB/RS232 adapter (Art. 0745830).