Specifications

AUTOSTAR CCD PHOTOMETRY 5
2.3 Setting Directories
Before going further, you may wish to set the Settings for the
image acquisition program (Envisage) for your setup. Select the
Settings pull-down menu (Figure 2-3).
Figure 2-3. Settings Window.
For the Image Directory and Dark Frames Directory, use the
default settings or create new ones. (To avoid confusion until you
have gained experience, it is suggested to use the default
directories.) Note: The Temperature boxes are merely a
Fahrenheit-to-Celsius conversion and do not do anything else.
Click OK when done.
Open the observatory, and set up the telescope and tracking. Turn
on the camera and start cool-down/stabilization. Allow 15 minutes
or more before proceeding.