Instruction Manual

TS13C-M SENSOR IS COMPATIBLE WITH ALL

MEADE INSTRUMENTS WIRELESS WEATHER STATIONS

BEFORE YOU BEGIN

• The remote sensor can be placed indoors or outdoors.

• We recommend using alkaline batteries for the remote

sensor when temperatures are above 32°F (0°C). We

recommend using AA lithium batteries when temperatures

are below 32°F (0°C).

• Avoid using rechargeable batteries. (Rechargeable batteries

cannot maintain correct power requirements).

• Insert batteries before first use, matching the polarity in the

battery compartment.

• ALWAYS install batteries in the remote sensor before the

main unit.

• Press RESET after each battery change with a paper clip

or similar tool.

• During an initial setup, place the main unit as close as

possible to the remote sensor.

• After reception is established (the remote temperature will

appear on the main unit's display), position the remote

sensor and the main unit within the effective transmission

range of 100 feet (30 meters).

NOTE:

1. Avoid setting manually the time and date on the main unit

before the remote temperature is displayed.

2. The effective operating range may be influenced by the

surrounding building materials and how the receiver

(main unit) and transmitter (remote sensor) are positioned.

3. Place the remote sensor so that it faces the main unit

(receiver), minimizing obstructions such as doors, walls,

and furniture.

4. Though the remote sensors are weather-resistant, they

should be placed away from direct sunlight, rain or snow.

NOTE: When the temperature falls below freezing, the

batteries in the outdoor remote sensors may have reduced

voltage supply and a shorter effective range. We

recommend using lithium batteries at temperature

32°F (0°C) and below.

MADE IN CHINA