User Manual

Enabling or Disabling the Time Alarms

• Press the ALARM/CHART to display the Weekday Alarm or Ice Warning Alarm (Pre-Alarm)

time. If these alarms are not set, the abbreviation OFF will be displayed.

• To enable or disable any of these alarms, press UP or DOWN.

Note: Press SET anytime during alarm selection mode to return to the default clock display.

Programming Time Alarms

• In the Clock and Alarm Mode, press the ALARM/CHART selecting the desired alarm.

• Press and hold ALARM/CHART button until the hour digit will flash

• Set the alarm hour using UP or DOWN. Press and hold either button for quick digit advance.

• Press ALARM/CHART to confirm selection.

• Set the alarm minutes using UP or DOWN. Press and hold either button for quick digit advance.

• Press ALARM/CHART to confirm selection.

• Set a Snooze interval (all three alarms share same snooze time duration) using UP or DOWN.

Press and hold either button for quick digit advance.

• Press ALARM/CHART to confirm your selection.

After programming is completed, the display will return to the alarm selection screen.

Disabling or Enabling Snooze function

To enable a snooze function press LIGHT/SNOOZE button.

Note: Alarm will automatically enter the snooze mode if no buttons are pressed after the alarm

sounds for 2 minutes. This will occur for a maximum of three times.

To disable alarm(s):

Press ALARM/CHART to disable the alarm (s).

Note: For weekday alarm, pressing ALARM/CHART will only disable the alarm for the current

day. The alarm will activate again on the next day, Monday through Friday.

TE923W IM1(ENG) HONEYWELL R.pmd 4/11/08, 5:28 PM27