Manual

A. WEATHER FORECAST/ PRESSURE window

B. TEMPERATURE/ HUMIDITY window

C. CLOCK window

D. DOWN button

• Select the next available mode

• Press and hold for 2 seconds to search for wireless signal from remote sensor.

• Decrease parameters.

E. ALARM button

• When time mode has been selected, press once to display the alarm time of weekday

alarm (W), single alarm (S) and pre-alarm (Pre-AL).

• Hold for 2 seconds, set weekday, single and pre-alarm’s alarm time

• When alarm is on, press once to stop the alarm temporarily.

F. TEMP ALARM button

• When temperature mode has been selected, press once to display the highest or lowest

temperature alarm’s value.

• Hold for 2 seconds, set the highest lowest temperature alarm’s value

• When alarm is on, press once to stop the alarm temporarily.

G. CHANNEL button

• Press to display the outdoor temperature readings of Channels 1, 2 and 3.

• Hold for 2 seconds, enter into the circulation mode and outdoor temperature readings of

Channels 1, 2 or 3 will be displayed automatically in every 5 seconds.

H. MODE button

• When pressure mode has been selected, press once to display the local pressure, altitude and

sea level.

• Press and hold for 2 seconds to set altitude and sea level.

• When time mode has been selected, press once to toggle between time with seconds display or

time with weekday display.

• Press and hold for 2 seconds, set language of the day of the week, year digit, month digit, date

digit, hour format (12/ 24 hours), hour digit and minute digit. (Note: calendar format is default

in month-date display).

• When temperature mode has been selected, press and hold for 2 seconds to toggle the

temperature unit between Celsius or Fahrenheit.

I. UP button

• Press to select the next available mode

• Increase the parameters

• In time with seconds display mode, press and hold for 2 seconds to activate/ deactivate radio

controlled time signal search manually.

• In time with weekday display mode, press and hold for 2 seconds to switch time zone from

Pacific, Mountain, Central to Eastern.

J. HISTORY button

• When pressure mode has been selected, press once to check the historical pressure data for

the past 24 hours.

K. MEMORY button

• When temperature mode has been selected, press to recall the minimum or maximum

temperature and humidity readings of main unit and remote units.

• Press and hold for 2 seconds, collected memories will be cleared.

MADE IN CHINA